DJI O3 aerial unit offers excellent video transmission quality with high definition and low latency, even at long distances.
The DJI O3 air unit is finally here! Integrating DJI's cutting-edge video transmission technology into a lightweight, compact body, the DJI O3 Air Unit features cutting-edge DJI transmission technology packaged in a lightweight, compact design. See for yourself that it is possible! The DJI O3 air unit will provide you with excellent image quality over long distances and is characterized by ultra-low latency, thanks to which you will take your FPV experience to a whole new level. The device is a true breakthrough in imaging performance: it offers a 1/1.7-inch sensor, flagship video technology, super wide 155° field of view and more. It also stands out for its compatibility with a wide range of products. Get a reliable tool for image transmission, unleash your creativity and enjoy even more journeys to dizzying heights!
Note: The new DJI O3 air unit can approach 2A with certain settings. Please check if your flight controller can support 9V/2A. If not, consider powering the air unit directly from the +/- battery on the flight controller or using a stand-alone voltage regulator that provides the required 2A.
Introducing the DJI O3 Air Unit
Characteristics
- Works with DJI FPV Goggles V2, DJI Goggles 2 and DJI FPV Remote Controller 2
- D-Cinelike mode for vibrant colors
- Flagship O3+ video streaming
- Customizable canvas mode
- 155° super wide-angle field of view
- 1/1.7 inch sensor
- Compact size
DJI O3 CAMERA
The camera module of the device offers 20 GB of built-in memory and is equipped with a 1/1.7-inch matrix. As a result, you can enjoy excellent image quality and incredible details. Thanks to the solutions used, you can easily record stable 4K/60FPS footage and the wide 155° field of view will allow you to get much more into the frame! The module also stands out for its f/2.8 aperture and 12.7mm equivalent focal length. It also comes with 20GB of built-in storage. D-Cinelike color mode lets you make detailed color adjustments to your shots. The camera module can be used with the DJI Avata ND filter set (ND8/16/32). The features will surprise you!
DJI O3+ FLAGSHIP DRIVE
Transform your video streaming experience. The DJI O3 supports a maximum video transmission quality of 1080p/100fps up to 10km.
SAY GOODBYE TO LIMITATIONS
Get more opportunities. DJI O3 Air Unit is compatible with DJI FPV Goggles V2, which offers O3 video transmission, high resolution, long range, high noise immunity and low latency. It also works with DJI Goggles 2, which feature a lighter, smaller design and have built-in micro-OLED screens. The device also works in combination with the DJI FPV Remote Controller 2, which is ergonomically shaped, equipped with a Hall effect stick, and allows you to use the M mode which allows you to perform even extremely complex maneuvers.
CUSTOMIZABLE
The DJI O3 air unit features a lightweight, compact design and broad compatibility. This means that you will successfully use it in various configurations. Combined with the DJI Goggles 2 and the DJI FPV Remote Controller 2, it will give you complete mobility and freedom!
CANVAS MODE
Canvas mode allows you to customize the information displayed on the DJI Goggles 2 or DJI FPV Goggles V2 screens. Set PID parameters and configure the system according to your habits!
Specifications
DJI O3 AIR UNIT
- Live view quality and end-to-end latency:
- With DJI FPV Goggles V2:
- 810p/120fps video transmission quality: latency is less than 28ms.
- 810p/60fps video transmission quality: latency is less than 40ms.
- With DJI Goggles 2:
- 1080p/100fps video transmission quality: latency is only 30 ms.
- 1080p/60fps video transmission quality: latency is only 40 ms."
- With DJI FPV Goggles V2:
- Flight Controller Firmware Supported: Compatible with flight controller firmware that supports Betaflight. For more information, see the product FAQs.
- Channels:
- Supports automatic mode
- Support manual mode: 40 MHz: 1 channel; 20 MHz: 3 channels; 10 MHz: 3 channels
- Maximum video transmission range: 10km (FCC), 2km (CE), 6km (SRRC)
- DJI Goggles supported: DJI Goggles 2 and DJI FPV Goggles V2
- Supported DJI Remote Control: DJI FPV Remote Control 2
- Recommended microSD cards:
- SanDisk Extreme U3 V30 A1 32GB MicroSDXC
- SanDisk Extreme Pro U3 V30 A1 32GB MicroSDXC
- Kingston Canvas Go!Plus U3 V30 A2 64GB microSDXC
- Kingston Canvas React Plus U3 V90 A1 64GB microSDXC
- Kingston Canvas React Plus U3 V90 A1 128GB microSDXC
- Kingston Canvas React Plus U3 V90 A1 256GB microSDXC
- Samsung PRO Plus U3 V30 A2 256GB microSDXC"
- Weight:
- Air Unit (Excluding Camera Module): Approx. 28 gr
- Air Unit (Camera Module Included): Approx. 36.4 gr
- Antenna: approx. 3 gr
- Operating temperature: -10º to 40º C (14° to 104° F)
- Dimensions:
- Transmission module: 32.5×30.5×14.5 mm
- Camera module: 21.2 × 20 × 19.5mm
- Coaxial cable: 115 mm
- 3 in 1 cable: 100 mm
- Antenna: 85mm
- Supported SD cards: microSD (up to 256GB)
- Communication frequency:
- 2.400-2.4835 GHz (RX only)
- 5.725-5.850 GHz (RX and TX)
- Channel information:
- FCC/SRRC/CE:
- 40 MHz:
- Channel 1: 5794.5 MHz
- 20MHz/10MHz:
- Channel 1: 5768.5 MHz
- Channel 2: 5804.5 MHz
- Channel 3: 5839.5 MHz
- Transmit power (EIRP):
- FCC: <33dBm
- CE: <14 dBm
- SRRC: < 30 dBm
- Input Voltage: 7.4-26.4V
- Cable: 3 in 1 100mm
DJI O3 CAMERA
- Weight: approx. 8.3 g (coaxial cable included)
- Objective:
- Field of view: 155°
- Equivalent focal length: 12.7mm
- Focal length: 2.34mm
- Aperture: f/2.8
- Focus mode: FF
- Focus range: 0.6 m to ∞
- Video resolution:
- With DJI Goggles 2:
- 4K@50/60fps
- 2.7K@50/60/100fps
- 1080p@50/60/100fps
- With DJI FPV Goggles V2:
- 4K@50/60fps
- 2.7K at 50/60/100/120 fps
- 1080p@50/60/100/120fps
- With DJI Goggles 2:
- Sensor: 1/1.7 inch CMOS
- ISO Range:
- 100-6400 (automatic)
- 100-25600 (manual)
- EIS: Supports RockSteady
- Roller shutter: Roller shutter
- Effective pixels: 48 MP
- Video Format: MP4
- Field of view: 155°
DJI O3 ANTENNA
- Polarization: Dual Band Dual Polarization
- Weight: approx. 3gr
- Connector: IPEX
- Length: 85mm
IMPORTANT NOTES
- The 155° FOV is only available when using the 4:3 format and when the video recording specification is 2.7K@50/60fps or 1080p@50fps/60fps; the aspect ratio is 16:9 and the video recording specifications are 4K@50/60fps, 2.7K@50/60fps or 1080p@50/60fps.
- The 2.4 GHz and 5.8 GHz frequency bands are supported for reception, and only the 5.8 GHz frequency band is supported for transmission. Some countries or regions do not support the 5.8GHz band. Please check local regulations before use and follow them strictly.
- Video latency data varies depending on the headphones used. With DJI Goggles 2 with 1080p/100fps video transmission quality, the minimum latency is 30 ms. With DJI FPV Goggles V2, with a video transmission quality of 810p/120fps, the latency does not exceed 28 ms.
- Compared to using DJI FPV Goggles V2 and DJI FPV Remote Controller. 4K/60fps videos do not support 4:3 aspect ratio and only support 16:9 aspect ratio.
- This device is compatible with DJI Goggles 2, DJI FPV Goggles V2 and DJI FPV Remote Controller 2.
- 4K/60FPS videos only support 16:9 aspect ratio. 4:3 aspect ratio is not supported.
- The video transmission bitrate may vary depending on the operating environment.
Recommended (not included)
- Diatone Mamba Micro 2A BEC 5V/9V for DJI Digital FPV system
- Skystars 2A Step-Down Voltage Regulator (4-36V to 9V)
- Pololu 9V, 2.5A step-down voltage regulator
Package Included
- 1x DJI O3 Air Unit Transmission Module
- 1 x 3 in 1 Cable for DJI O3 Air Unit
- 1 x DJI O3 Air Unit Antenna
- 1x DJI O3 Air Unit camera
related videos
SHIPPING
Italy
• Express Shipping (1-4 working days)
• Free for orders over €150.00
• €9.99 for orders under €150.00
Europe (European Union)
• International Express Shipping (2-6 business days)
• €29.99 for all orders
PAYMENT METHODS
On Drone24hours.com you can use the following payment methods:
- Paypal
- Visa
- Visa Electron
- CartaSi
- Postepay
- MasterCard
- American Express
- Paypal prepaid cards linked to the Visa or Mastercard circuit
- Cash on delivery
Return Policy
You can return products that you are not satisfied with within 14 days of receiving your order. To be eligible for a return, the product must be in the same condition in which you received it, unworn or unused, with tags and in the original packaging. You must also have your receipt or proof of purchase.
Damaged or incorrect goods
In case you receive wrong or damaged goods, please contact us immediately within 14 days of receiving your order. Please send an email with photos and videos of the product, a detailed description of the problem and what you have done to solve it. You may be asked to return the item. For confirmed defective goods, we will send a replacement free of charge.
Exceptions / Non-returnable items
Some items cannot be returned, such as perishable goods (food, flowers, plants), personalized or made-to-order products, and personal care products (cosmetics). We do not accept returns on hazardous materials, flammable liquids, or gases. We do not accept returns on sale items or gift cards.
Exchanges
If you wish to exchange an item, the fastest way is to return it and place a new order for the new item.
Under the 24-month Legal Guarantee, Drone24Hours is responsible to the consumer for any defects in conformity that cannot be detected at the time of purchase.
The lack of conformity exists when the product is not suitable for the use for which it is normally intended, does not conform to the description or does not possess the qualities promised by the seller, does not offer the qualities and performances usual for a good of the same type, is not suitable for the particular use desired by the consumer if brought to the attention of the seller at the time of purchase and accepted by the seller (art. 129 of the Consumer Code).
Any lack of conformity which becomes apparent within 24 months of the date of purchase of the goods must be reported within 2 months of the date of discovery of the defect.
Unless proven otherwise, it is presumed that any lack of conformity that becomes apparent within 6 months of delivery of the goods already existed on that date. In the event of a lack of conformity, the consumer has the right to have the conformity of the goods restored, free of charge, by repair or replacement (art. 130 of the Consumer Code).
The consumer may ask, at his choice, the seller to repair the goods or replace them, free of charge in both cases, unless the requested remedy is objectively impossible or excessively expensive compared to the other. Repairs or replacements must be carried out within a reasonable time from the request of the Consumer; the average time for returning the product to the Consumer is 20 days.
If Drone24hours is unable to return the repaired product within the maximum period of 60 days, the consumer may request one of the alternative remedies (replacement, termination of the contract, price reduction).
Drone24Hours will send the product for any repairs to the Technical Assistance Center authorized by the Manufacturer.
What happens if the Service Center does not find the lack of conformity?
If the lack of conformity is not found, Drone24Hours will communicate the estimate to the Customer, who can decide whether or not to carry out the repair at his own expense. In this case, any transport costs and diagnosis of the defect requested by the Assistance Center will be borne by the Customer.
