TBS CROSSFIRE NANO RX (SE) TBS is stepping up the Long Range/UHF game, with no competition in sight! With TBS Crossfire Nano RX we condense 2 years of engineering experience,...
Frsky XM+ Frsky XM+ Micro D16 SBus Full Range Receiver Up to 16CH Frsky Characteristics PCB protection with handcrafted coating Specifications - Size: 21.5*12*3.5mm (L x W x H) -...
TBS Crossfire Nano RX Pro. Increases telemetry output power (downlink), without sacrificing compactness. Same form factor, same pinout, 20x the power! TBS Crossfire Nano RX Pro: The TBS Crossfire Nano...
R-XSR Ultra Mini Redundancy Receiver Description FrSky ultra mini R-XSR receiver is the development of the FrSky full range XSR receiver. R-XSR It's a standalone receiver with all the features...
Features of tbs tracer nano rx 250Hz: Fastest radio and telemetry link available! Next-generation 2.4 GHz technology meets the robust Crossfire radio engine 3ms end to end latency Nano-sized receiver...
The R9 MX is the improved version of the previous R9 MM / Mini series long-range receivers, equivalent in size and weight equipped with a robust detachable Ipex1 antenna connector....
The FrSky R9 MM is the latest 900 MHz mini receiver in the long range series. It carries most of the features of the previous R9 Mini receiver, such as...
A full-capability TBS Crossfire Diversity receiver in nanoscale form. Ideal for long range miniquads or smaller wings. Attention! Update your crossfire transmitter to v2.88 or higher before connecting! Once again...
BETAFPV ELRS Nano Rx The BETAFPV Nano receiver is based on the ExpressLRS project, an open source RC link for RC applications. ExpressLRS aims to achieve the best possible link...
The RP1 are 2.4GHz nano ELRS series receivers are open source receivers based on ExpressLRS. The Nano receivers, first developed by Jye Smith of the ExpressLRS development team, feature an...
BETA FPV ELRS Lite Rx The BETAFPV Lite receiver is based on the ExpressLRS project, an open source RC link for RC applications. ExpressLRS aims to achieve the best possible...
Foxeer ELRS 2.4G LNA Receiver Processor ESP8285+SX1280 Working frequency 2400GHz~2500GHz Flash frequency 25~500Hz Firmware version 3.0.1 Indicator RGB LEDs Entrance 5V Weight 0.7g Cut 10.5 x 19mm Package Included 1x...
The R9 MM-OTA 915 MHz receiver supports over-the-air wireless firmware updates making connecting to receivers even easier! The R9 MM-OTA receiver implements the ACCESS protocol and offers the user improved...
Flywoo 2.4GHz Elrs Nano Series receiver is an open source program based on Expresslrs, the lightweight, lightweight, minimal size, uses ESP8285 MCU. So you can update the firmware via WiFi,...
BETAFPV SuperD ELRS is the first True Diversity receiver that applies two antennas, two receiver chains and TCXO (temperature compensated crystal oscillator) technology, achieving super accurate frequency rate and excellent...
The ARCHER M+ receiver features its small form factor and new ACCESS protocol. ACCESS provides the lower latency and improved performance of our previous XM+ receivers. The ARCHER M+ receiver...
The iFlight ELRS system is finally here! Extreme range and highest packet rate in the market for the lowest delay. Security systems are a thing of the past. ExpressLRS RX...
The Axisflying ELRS radio receiver is a radio receiver based on the ExpressLRS project, an open source RC link for RC applications. ExpressLRS aims to achieve the best possible link...
Foxeer ELRS Lite 2.4G Receiver - Maximum Performance for FPV Racing Drones and RC Airplanes The Foxeer ELRS Lite 2.4G Receiver is the trusted ally for FPV racing drone pilots...
ILRP1 and ELRS RP2 2.4 GHz nano series receivers are open source receivers based on ExpressLRS. The Nano receivers, first developed by Jye Smith of the ExpressLRS development team, feature...
The GEPRC ELRS Nano receiver is a new generation remote control system developed based on the ExpressLRS open source project. ExpressLRS sets new standards for long-range connectivity, low latency and...
FrSky ARCHER R8 Pro OTA 2.4GHz 8/24CH ACCESS S.Port/F.Port PWM SBUS Full Range Telemetry Receiver Output for RC Drone Overview Archer R8 PRO has 8 high-precision PWM channel outputs and...
The frequency of ELRS-2.4G-NANO is 2.4Ghz, based on Receiver for ESP8285 MCU, supports WIFI upgrade and has 100mw return power. You can use our FPV drones. Specific: Model: ELRS 2.4G...
RadioMaster RP series receivers now feature a TCXO (temperature compensated crystal oscillator), ensuring reliable, stable and accurate signal reception, enabling superior performance in harsh environments and enhancing the flight experience....
SpeedyBee Rx Nano 2.4G ExpressLRS Specifications Model SpeedyBee Nano RX 2.4 GHz First name ExpressLRS receiver Frequency 2.4Ghz Antenna T Antenna (54*78mm, 0.6g) Chip SX1280+ESP8285 Power 100mW Input voltage 5V...
DarwinFPV "Cement" ELRS 2.4G Ultra Rugged Receiver The original design intent of the ultra-durable "cement" product series: How to make the FPV drone break the environmental limits again? To increase...
What could be better than a Tracer receiver and an improved Unify Pro32 video transmitter making love? Exactly! Nothing, absolutely nothing. Introducing the TBS Tracer Sixty9, a VTx board and...
2.4GHz ELRS micro receiver The BETAFPV micro receiver is based on the ExpressLRS project, an open source RC link for RC applications. ExpressLRS aims to achieve the best possible link...
The ARCHER GR8 receiver features the new ACCESS protocol. ACCESS offers lower latency and improved performance compared to our previous G-RX8 receivers. With the support of the OTA (Over-The-Air) function,...
The Flywoo TCXO 2.4G ELRS uses a temperature-compensated crystal oscillator to improve the clock frequency accuracy of the MCU The new Flywoo TCXO 2.4G ELRS uses a temperature-compensated crystal oscillator...
We often restock popular items or they may be returned by the other customers. If you would like to be
notified when this happens just enter your details below.
We respect your privacy and don't share your email with anybody.
×
Alert me if this item is restocked
Thank you, we have now received and recorded your request to be notified should
be restocked.