Prodotti Coupon

Upgrade your Zorro Radio with these high quality leather grips! Durable and elegant, it makes you feel good even after a long time of wearing. These leather grips are suitable...

Rear bumper and ELRS antenna holder for iFlight Nazgul F5 Designed to protect the front of your model from accidental impacts for the iFlight Nazgul Evoque F5D and F5X. The...

Front bumper for iFlight Nazgul Evoque F5D and F5X Designed to protect the front of your model from accidental impacts for the iFlight Nazgul Evoque F5D and F5X. The chassis...

The T antenna is an omnidirectional antenna. It is intended for short to medium range and is suitable for most conditions. Specifications Type: T-type omnidirectional antenna Antenna polarization: vertical/horizontal polarization...

C03 FPV Micro Camera C03 is a lightweight 1.45g camera with 1200TVL resolution designed to provide exceptional performance for micro FPV quadcopters. It has a 2.1mm lens that provides a...

Radiomaster Boxer Max AG01 Introducing the Radiomaster Boxer Max: A high-performance remote control with a sleek carbon fiber patterned case. The Boxer Max comes standard with upgraded AG01 billet aluminum...

RadioMaster Micro 2.4GHz RM 4-in-1 multiprotocol module-JR The RadioMaster 4IN1 external module is a multi-protocol module integrating CC2500, NRF24L01, A7105 and CYRF6936 RF chips. Designed for OpenTX and EdgeTX systems,...

Rcinpower brushless motor Smoox 2806 - 1350KV This is the RCinpower Smoox 2806 motor, designed for your next 6 or 7 inch FPV build. You will receive the usual great...

XT60 charging cables and JST-XH balance board for ISDT D2 P10 P20 Hota D6 P6 ToolkitRC M6D Balance Charger Characteristics Adapter Board For balance charger charging balance board TP/FP balanced...

TBS Source One V5 arm protector TPU printed protection to protect the arm and motor from accidental impacts for TBS Source One V5. The SOURCE ONE is a wide stance...

Adapter 45/135 degrees SMA Male to RP-SMA female Description Item Name: SMA Male to RP-SMA Female Antenna Adapter Package Included 1 x adapter

A4 cutting mat Characteristics 1. Made of high quality PP plastic, protect the blade, extend the life of your blade. 2. The cutting mat can also make your cutting work...

Amass XT30 Female Connector Characteristics Original Amass XT30 connector Made of nylon plastic Gold plated brass connectors Rated for 30A continuous Available in the Female version Package Included 1x AMASS...

GoPro RUNCAM 5 TPU support Runcam 5 support with ND filter position and attachment for GoPro type fixings Available in various colors: Red, Blue, Green, Black, Cyan, Blue, Yellow. Package...

Flywoo USB Type-C Male to Type-C Female Adapter For hard-to-reach DJI Air unit and Caddx Vista USB-C port connections, this is a great little adapter! Also works with flight controllers...

Flywoo DJI O3 connection cable The O3 Unit Connect cable is a custom cable designed to replace the easily damaged socket cable that connects the two circuit boards in the...

IFlight AOS UL7 Replacement Arm Characteristics Arm thickness: 2.5mm Specifications Size 7 inches Model Name AOS UL7 Carbon Fiber Material Package Included IFlight AOS UL7 EVO Replacement Arm

Happymodel PH2.0 1S JST USB charger This convenient Happymodel USB charger is designed for 200-400mAh battery. It has a LED light to indicate when charging is complete, as well as...

FlyfishRC 7 In 1 FPV Hex Screwdriver Kit meets your fpv building and repair needs. It is small and easy to carry. Specifications Brand: FlyFishRC Product: FPV 7 in 1...

Flyfish rc Sword 2207 The Sword 2207 FPV motor is a high performance and economical motor that is affordable, ensuring that all pilots can now embrace their passion at an...

Happymodel Frame Mobula8 85mm Brushless Whoop Frame New durable 85mm Mobula8 chassis, mounted on FC in low position Specifications Brand: Happymodel Step: 85 mm Weight: 11.5 grams Color: Transparent Black...

Happymodel motor RS0802 KV20000 brushless motor for Mobula7 1S Specifications Brand: Happymodel Item Name: RS0802 Brushless Motor KV: 20000KV Shaft diameter: 1.5mm Configuration: 9N12P Stator diameter: 8 mm Stator length:...

AOS 3.5 V5 Replacement Arm Specifications Arm thickness: 4mm Package Included 1x Replacement Arm for AOS 3.5 V5 Frame

HappyModel 2.4g ExpressLRS ELRS EP1 RX Characteristics Type: ISM ESP8285 MCU SX1280IMLTRT RF Module Omnidirectional antenna Frequency range: 2400 MHz to 2500 MHz Maximum reception refresh rate: 500 Hz Minimum...

Kakute F722 - ESC Tekko32 F4 4in1 50A - Stack FC Features High-performance STM32 F722 MCU with speeds up to 216 MHz. ICM42688P gyroscope, low noise independent power supply. Various...

Holybro Tekko32 F4 4in1 60A ESC The Tekko32 F4 4in1 60A ESC is a high-performance electronic speed controller. This compact 4-in-1 ESC is designed with a 30x30 mounting pattern and...

Kakute F722 Flight Controller Characteristics High-performance STM32 F722 MCU with speeds up to 216 MHz. ICM42688P gyroscope, low noise independent power supply. Various ports for quick and easy setup: ESC...

Atlas HV 5.8G 3W VTx Specifications Frequency 5.8G 5 bands: A, B, E, F, R Broadcast channel: 37 Operating mode Key button, Smart Audio Transmission power Switchable: PIT, 25mW, 3000mW...

A3 cutting mat Characteristics 1. Made of high quality PP plastic, protect the blade, extend the life of your blade. 2. The cutting mat can also make your cutting work...

GEPRC BLS60A 4in1 ESC Specifications Input voltage: 3-6S Lipo Galvanometer: support Continuous current: 60A Burst current: 65 A (5 seconds) Support protocol: Dshot 150/300/600 Size: 42.9×39.7mm, hole 30.5×30.5mm, the φ4mm...

Capture the skies, film the world Protection in all conditions – Made with water-resistant materials Command with confidence: Controller attachment and loop system Customized for your needs: External MOLLE system...

SpeedyBee downloader Technical specifications Product name: SpeedyBee Discharger Power input voltage range: 3-6S Power input connector: XT60-male Fast charging output interface: USB-C port Supported fast charging protocol: PD3.0/QC4+/PPS/AFC/FCP/SCP/PE2.0/SFCP Fast charging...

Walksnail Avatar HD Pro Kit (Dual Antenna Version) characteristics Dual antennas 4K compatible FOV160° 6V-25.2V Range 4 km Low latency of 22ms Built-in 32G memory High Frame Starlight 1080P 120fps...

CADDXFPV Ratel Pro Analog Camera ●Day and night ●Black light ●1500TVL ●Super WDR ●4.5V-27V ●FOV125° Characteristics Equipped with black light technology, Ratel Pro displays true color images during the day...

HGLRC USB Tuning Adapter for Flight Controller Specifications Item Name: Tuning Adapter Dimensions: 11.65 x 11.11mm Weight: 2.4g Package Included 1x HGLRC Tuning Adapter

HGLRC Zeus VTX PRO 1.6W For FPV Racing Drone Specifications Zeus VTX PRO 1.6W Built-in Microphone Input voltage: DC 7-36V Output voltage: 5V/500mA PIT: 25mW/13.95dBm 400mW/26.02dBm 800mW/29.03dBm 1.6W/32.04dBm Antenna interface:...

Nazgul Evoque F5 V2 chassis kit Gone are the days of your electronics getting filled with dirt and wet grass every time you crashed. Our latest chassis reduces the contamination...

T-Motor C8.5x5.3 professional cinematic prop (2 pieces) The T-Motor C8.5 Professional Cinema Propeller is a 3-blade propeller with a 5-inch pitch. Crafted with precision engineering, this set of two propellers...

GEP Camera Damping Ball (6 PCS) The GEP-Camera Damping Ball is a shock-absorbing damping ball specially designed for camera gimbal equipment. To solve camera shake and jelly, it is made...

GEP-F405-HD V2 FC Characteristics Uses mainstream STM32F405 chip Equipped with the latest 42688-P gyro 16 million black box storage Built-in LC filter Upgrade USB Type-C interface Connected directly to the...

EMAX Tinyhawk III Plus Freestyle FPV Racing Drone RTF and BNF Analog Version - ELRS Embark on the future of outdoor FPV quadcopters with the all-new Tinyhawk III Plus Freestyle,...

VIFLY ToothStor - 2S 4-Port Balanced Charger with Storage Mode Characteristics 【4-Port 2S Balanced Charger with Storage Mode】 You can balance the charging of four 2S batteries at the same...

M2(4.4x2x6.6) Rubber Anti-Vibration Mounts for F4/F7 Flight Controller (10pcs) Technical specifications Material: Rubber Color: Black/Red/Purple/Yellow Maximum outer diameter: 4.4mm Installation diameter: 2mm Height: about 6.6mm Quantity: 10 pieces Characteristics RC...

TRUERC X-AIR 5.8 MK II for DJI GOGGLES 2 A pair of X-airs that perfectly fit the DJI Goggles 2 for a huge increase in range. Simply pop out the...

IFlight BLITZ ATF435 FC The IFlight BLITZ ATF435 FC is a lightweight, high-performance flight controller ideal for FPV drones. Weighing just 7.8g and measuring 36.5 x 35mm, it offers a...

For a long time, our goal has been to not only be the best performing, but also the most affordable LRS on the market. TBS CROSSFIRE MICRO TX V2 STARTER...

Gemfan 1210 2-Blade Propellers (1.0mm Shaft) Transparent Black Gemfan 1210 2-blade propellers are designed for high-speed ripping, making them the perfect choice for fast-paced racing and freestyle drone enthusiasts. These...

Gemfan 1208 3-Blade Propellers (1.0mm Shaft) Transparent Grey For those looking for improved stability and control during whoop racing, the Gemfan 1208 3-blade propellers are an excellent option. The 3-blade...

XT60 male blue Technical specifications Item No: XT60 Item Name: Male Female Bullet Connector Plugs Blue color Scope of application: battery, cruise control and charger. Amperage: 30amps Bullet Connector: 3.5mm...

Characteristics The XT60 connector is a standard power connector designed for high currents. This connector has a specific connection where the minus is on the beveled side and the plus...