BT3.0 connectors
BT3.0 connectors are designed for 2S battery, with 3 metal pins that allow power balancing while charging without an additional balancing connector. It simplifies the assembly of the 2S battery and weighs only 1.28 grams, making it smaller and super lightweight than ordinary connectors on the market. For 2S quad riders, it is also a more affordable choice for the 2S battery, as well as the best option to save a few grams from the quad.
Characteristics
- An innovative battery option for whoop 2S drones, designed specifically for whoop 2S drones.
- BT3.0 connectors offer unparalleled convenience by combining balance charging and discharging power cable capabilities into a single connector, eliminating the need to purchase an expensive balance charger.
- BT3.0 connectors are smaller and lighter, with a total weight of just 1.28g for both male and female connectors, compared to regular connectors.
- The BT3.0 connectors boast a rated discharge current of 12A and an instantaneous current of up to 20A, meeting the discharge requirements of 2S batteries.
Specifications
- BT3.0 Male Connector: 0.6g/pc, 11.2*9.2*6.1mm
- BT3.0 Female Connector: 0.68g/pc, 10.1*9.1*5.4mm
- BT3.0 male+female connector: 1.28g/pc
- BT3.0 XH2.54 Adapter Cable: 1.84g/pc, 35mm
- Whoop BT3.0 2S Coiled Cable: 1.39g/pc, 30mm
- Insertion force: 3-22N
- White color
- Metal Material: Gold Plated Copper
- Plastic material: PA9T
- Plug lifespan: 1000 times
- Rated current: 12A
- Instantaneous current: 20A
| BT3.0 | BT2.0 | XT30 | |
| Rated current | 12A | 9A | 15A |
| Instantaneous current | 20A | 15A | 30A |
| Weight | 1.28g | 0.6g | 1.8g |
| To measure | 10.1*9.1*5.4mm | 8.5*6.0*4.2mm | 12.4*10.2*5.2mm |
Below is the diagram for the male and female connectors.
BT3.0 connectors
BT3.0 connectors are a 3-PIN terminal, two metal pins with a diameter of 1.3mm are used to discharge the battery, and two metal pins with a diameter of 1.3mm and a metal pin with a diameter of 1 .0 mm are combined in a 3PIN connector as a balanced charger for charging the battery. BT3.0 connectors have polarity markings on the soldered part but do not support reverse connections. When soldering wires, be sure to pay attention to the positive and negative directions. The connector design prevents reverse connections, so do not force it in the opposite direction to avoid short circuit risks.
Package Included
- Item: BT3.0 Male/Female Connectors (10pcs)
- 5 x BT3.0 male connectors
- 5 x BT3.0 female connectors
SHIPPING
Italy
• Express Shipping (1-4 working days)
• Free for orders over €150.00
• €9.99 for orders under €150.00
Europe (European Union)
• International Express Shipping (2-6 business days)
• €29.99 for all orders
PAYMENT METHODS
On Drone24hours.com you can use the following payment methods:
- Paypal
- Visa
- Visa Electron
- CartaSi
- Postepay
- MasterCard
- American Express
- Paypal prepaid cards linked to the Visa or Mastercard circuit
- Cash on delivery
Return Policy
You can return products that you are not satisfied with within 14 days of receiving your order. To be eligible for a return, the product must be in the same condition in which you received it, unworn or unused, with tags and in the original packaging. You must also have your receipt or proof of purchase.
Damaged or incorrect goods
In case you receive wrong or damaged goods, please contact us immediately within 14 days of receiving your order. Please send an email with photos and videos of the product, a detailed description of the problem and what you have done to solve it. You may be asked to return the item. For confirmed defective goods, we will send a replacement free of charge.
Exceptions / Non-returnable items
Some items cannot be returned, such as perishable goods (food, flowers, plants), personalized or made-to-order products, and personal care products (cosmetics). We do not accept returns on hazardous materials, flammable liquids, or gases. We do not accept returns on sale items or gift cards.
Exchanges
If you wish to exchange an item, the fastest way is to return it and place a new order for the new item.
Under the 24-month Legal Guarantee, Drone24Hours is responsible to the consumer for any defects in conformity that cannot be detected at the time of purchase.
The lack of conformity exists when the product is not suitable for the use for which it is normally intended, does not conform to the description or does not possess the qualities promised by the seller, does not offer the qualities and performances usual for a good of the same type, is not suitable for the particular use desired by the consumer if brought to the attention of the seller at the time of purchase and accepted by the seller (art. 129 of the Consumer Code).
Any lack of conformity which becomes apparent within 24 months of the date of purchase of the goods must be reported within 2 months of the date of discovery of the defect.
Unless proven otherwise, it is presumed that any lack of conformity that becomes apparent within 6 months of delivery of the goods already existed on that date. In the event of a lack of conformity, the consumer has the right to have the conformity of the goods restored, free of charge, by repair or replacement (art. 130 of the Consumer Code).
The consumer may ask, at his choice, the seller to repair the goods or replace them, free of charge in both cases, unless the requested remedy is objectively impossible or excessively expensive compared to the other. Repairs or replacements must be carried out within a reasonable time from the request of the Consumer; the average time for returning the product to the Consumer is 20 days.
If Drone24hours is unable to return the repaired product within the maximum period of 60 days, the consumer may request one of the alternative remedies (replacement, termination of the contract, price reduction).
Drone24Hours will send the product for any repairs to the Technical Assistance Center authorized by the Manufacturer.
What happens if the Service Center does not find the lack of conformity?
If the lack of conformity is not found, Drone24Hours will communicate the estimate to the Customer, who can decide whether or not to carry out the repair at his own expense. In this case, any transport costs and diagnosis of the defect requested by the Assistance Center will be borne by the Customer.
