Happymodel Mobula6 2024 1S 65mm  - Drone24Hours
Happymodel Mobula6 2024 1S 65mm  - Drone24Hours
Happymodel Mobula6 2024 1S 65mm  - Drone24Hours
Happymodel Mobula6 2024 1S 65mm  - Drone24Hours
Happymodel Mobula6 2024 1S 65mm  - Drone24Hours
Happymodel Mobula6 2024 1S 65mm  - Drone24Hours

Happymodel Mobula6 2024 1S 65mm

€169,99 EUR

×

We often restock popular items or they may be returned by the other customers. If you would like to be notified when this happens just enter your details below.


Happymodel Mobula6 2024 1S 65mm

Please select variant
Please enter name
Invalid email address
Required mobile number Invalid number Invalid country code Too short Too long ✓ Valid
Your notification has been registered. Close
Looks like you already have notifications active for this size!

We respect your privacy and don't share your email with anybody.

×

We have cancelled your request.

Pay online with PayPal, credit, debit and prepaid cards securely, even on delivery!

visamastermaestropaypalapple paygoogle payshopify pay
["LiPo 1S/3.7V"]
Description

Happymodel Mobula6 2024 1S 65mm

The Happymodel The Mobula6 2024 is a classic sized 65mm Tinywhoop . The Mobula is particularly suitable for flying indoors , but you can also have fun with it in the garden or on the playground. The Mobula 6 2024 aims for the lowest possible weight and is a lightweight variant of the classic Mobula 6. Without the battery, it weighs only 17.7 grams , making flying the drone completely safe. The covered propellers also contribute to safety. The brushless motors ensure the long life of the Tinywhoop. The second version has motors connected via connectors.

Characteristics

AIO Flight Controller with ELRS and Openvtx 5.8G Serial Receiver
Super light 1S 65mm Brushless whoop only 17.7g
Equipment with the lightest brushless motors: SE0702 only 1.46 grams
FX17-B 1/3 CMOS 800TVL Fantastic Movie Camera
Smooth and powerful
Compatible for 1S Lipo/LIHV

Specifications

  • Brand: Happymodel
  • Item Name: Happymodel Mobula6 2024 1S 65mm
  • Wheelbase: 65mm
  • Size: 81mm*81mm*37mm
  • Weight: 17.7 g
  • V2 version with SuperX ELRS V2. 0 AIO
  • Battery connector: BT2.0

Component Specifications

The engine Mode: SE0702 KV28000
Configuration: 9N12P Diameter
stator: 7mm
Stator length: 2mm
Shaft diameter: Φ1 mm
Motor size (diameter*length): Φ9.5mm*14mm
Weight (g): 1.46 g
Number of cells (Lipo): Only 1S
Propellers Materials: PC
Inches: 31mm
Pitch: 0.8 inch
Weight: 0.21 g
Mounting hole diameter: 1mm
Flight Controller SuperX ELRS AIO 5-IN-1 Flight Controller
MCU: STM32F411CEU6 (100MHZ, 512K FLASH), ESP32-PICO-D4
Sensor: BMI270 (SPI connection)
Mounting hole size: 25.5mm*25.5mm
Power supply: 1S battery input (DC 2.9V-4.35V)
Built-in 5A (each) Blheli_S 4in1 ESC
Integrated Betaflight OSD (SPI control)
Integrated OpenVTX 5.8G 0mw~400mw (MSP control)
Integrated UART ExpressLRS v3.0.0
Integrated voltage meter sensor, voltage meter scale 110
Built-in current meter sensor, 1175 current meter scale
Integrated 4in1 ESC Power supply: 1S LiPo/LiPo HV
Current: 5A continuous peak 6A (3 seconds)
Supports programmable BLHeliSuite
Factory Firmware: Bluejay v0.19.2
Default protocol: DSHOT300
Recommend the ESC startup power value to min1100/max1200
Integrated ExpressLRS serial receiver Packet speed option: 50Hz/150Hz/250Hz/500Hz
ExpressLRS firmware version: V3.0
RF Frequency: 2.4GHz
Antenna: enameled copper wire antenna
Telemetry Output Power: <12 dBm
Receiver Protocol: Serial based CRSF
Compatible with TX ExpressLRS V3.xx module
Could flash single ELRS receiver firmware via Wifi
ExpressLRS Firmware Target: ExpressLRS Firmware Target:
HappyModel AIO 2.4GHz RX+VTX (ExpressLRS web flash)
Available from Expresslrs 3.4.0 RC2
Integrated 5.8g VTX Firmware version: OPENVTX
MSP VTX
PIT mode support
Channels: 40ch
Transmit power: 0/RCE/25mw/100mw/400mw
Power supply: DC 5V
Current (5v): <650ma (400mw)
Antenna connector: U.FL
FX17-B Camera Model: FX17-B
Image Sensor: 1/3″ CMOS
Horizontal resolution: 800TVL
FOV 150°
Signal system: NTSC
Net weight: 1.5g
Size: L14mm*W14mm*H13mm

Recommended Parts

Package Included

  • Mobula6 2024 1S 65mm Whoop Drone Frame + Canopy
  • Option 2: SuperX ELRS AIO 5-IN-1 Flight Controller V2.0
  • SE0702 KV28000 brushless motor
  • Gemfan 1208-3 31mm three blade propellers (4cw+4ccw)
  • FX17-B 1/3 CMOS 800TVL NTSC 4:3 camera
  • Built-in 5.8G VTX 25mw~400mw
  • Replacement roof
  • Propeller Removal Tool
  • Screwdriver

PLEASE NOTE: TO ENSURE THE HIGHEST QUALITY, EACH MODEL WILL BE INSPECTED BY OUR STAFF BEFORE BEING SHIPPED.


Factory firmware and default dump file (compatible with flight controller version V1.0 and V2.0):

Mobula6 2024 4.4.0 factory firmware
Dump files for Mobula6 2024 with Betaflight 4.4.0
Mobula6 Factory Firmware 2024 4.4.2
Dump files for Mobula6 2024 with Betaflight 4.4.2

The AIO flight controller comes with two kinds of gyro sensor, one is BMI270 and another is ICM42688P

So after flashing the firmware again, the first gyro direction for BMI270 should be set to CW0° and for ICM42688P it should be set to CW90°

The easiest way to distinguish between BMI270 and ICM42688P:

BMI270 gyro sensor with 3.2kHz gyro refresh rate

ICM42688P Gyro sensor with 8kHz gyro refresh rate

Shipping and Payments

SHIPPING

Italy

Express Shipping (1-4 working days)

• Free for orders over €150.00

• €9.99 for orders under €150.00

Europe (European Union)

International Express Shipping (2-6 business days)

• €29.99 for all orders

READ MORE >>

PAYMENT METHODS

On Drone24hours.com you can use the following payment methods:

  • Paypal
  • Visa
  • Visa Electron
  • CartaSi
  • Postepay
  • MasterCard
  • American Express
  • Paypal prepaid cards linked to the Visa or Mastercard circuit
  • Cash on delivery
Returns and Refunds

Return Policy

You can return products that you are not satisfied with within 14 days of receiving your order. To be eligible for a return, the product must be in the same condition in which you received it, unworn or unused, with tags and in the original packaging. You must also have your receipt or proof of purchase.

Damaged or incorrect goods

In case you receive wrong or damaged goods, please contact us immediately within 14 days of receiving your order. Please send an email with photos and videos of the product, a detailed description of the problem and what you have done to solve it. You may be asked to return the item. For confirmed defective goods, we will send a replacement free of charge.

Exceptions / Non-returnable items

Some items cannot be returned, such as perishable goods (food, flowers, plants), personalized or made-to-order products, and personal care products (cosmetics). We do not accept returns on hazardous materials, flammable liquids, or gases. We do not accept returns on sale items or gift cards.

Exchanges

If you wish to exchange an item, the fastest way is to return it and place a new order for the new item.

READ MORE >>

Warranty

Under the 24-month Legal Guarantee, Drone24Hours is responsible to the consumer for any defects in conformity that cannot be detected at the time of purchase.

The lack of conformity exists when the product is not suitable for the use for which it is normally intended, does not conform to the description or does not possess the qualities promised by the seller, does not offer the qualities and performances usual for a good of the same type, is not suitable for the particular use desired by the consumer if brought to the attention of the seller at the time of purchase and accepted by the seller (art. 129 of the Consumer Code).

Any lack of conformity which becomes apparent within 24 months of the date of purchase of the goods must be reported within 2 months of the date of discovery of the defect.

Unless proven otherwise, it is presumed that any lack of conformity that becomes apparent within 6 months of delivery of the goods already existed on that date. In the event of a lack of conformity, the consumer has the right to have the conformity of the goods restored, free of charge, by repair or replacement (art. 130 of the Consumer Code).

The consumer may ask, at his choice, the seller to repair the goods or replace them, free of charge in both cases, unless the requested remedy is objectively impossible or excessively expensive compared to the other. Repairs or replacements must be carried out within a reasonable time from the request of the Consumer; the average time for returning the product to the Consumer is 20 days.

If Drone24hours is unable to return the repaired product within the maximum period of 60 days, the consumer may request one of the alternative remedies (replacement, termination of the contract, price reduction).

Drone24Hours will send the product for any repairs to the Technical Assistance Center authorized by the Manufacturer.

What happens if the Service Center does not find the lack of conformity?

If the lack of conformity is not found, Drone24Hours will communicate the estimate to the Customer, who can decide whether or not to carry out the repair at his own expense. In this case, any transport costs and diagnosis of the defect requested by the Assistance Center will be borne by the Customer.