T-Motor MINI Racer F7
€64,99 EUR
T-Motor Mini Racer 20×20 F7 Flight Controller The T-Motor Mini Racer F7 is a 3-6S 20×20 mini flight controller with a 16MB Blackbox flash memory, 5V.2A BEC and a MPU6000...
BetaFPV Micro ELRS 2.4GHz receiver
€19,99 EUR
ELRS 2.4GHz Micro Receiver The BETAFPV micro receiver is based on the ExpressLRS project, an open source RC link for RC applications. ExpressLRS aims to achieve the best possible link...
BetaFPV BT2.0-PH2.0 adapter cables
€8,99 EUR
BT2.0-PH2.0 adapter cables BT2.0 Connector : The most significant revolution in Whoop 1S drone. Not sure if it's worth upgrading to BT2.0? Check out more from Joshua Bardwell' video- Proof...
Gemfan 31mm 3-blade propellers (1.0mm shaft)
€3,99 EUR
Gemfan 31mm 3-Blade Micro Whoop Propellers(1.0mm Shaft) These 31mm propellers are only customized for 65mm brushless drones with 1.0mm motor shaft. The recommended engine is Engine 0603 and engine 080X...
GemFan Hurricane 2009-3 blades 1.5 mm - Purple
€4,99 EUR
GemFan Hurricane 2009-3 blades 1.5 mm - Purple Specifications Inches: 2 inches Pitch: 0.9 inch Weight: 0.4 g Mounting: 1.5mm T-Attachment Colors: transparent transparent gray, transparent blue, orange, purple Recommended...
Tinyhawk III Spare Parts - 15000KV Motor
€14,99 EUR
Tinyhawk III Spare Parts - 15000KV Motor Characteristics It is a replacement motor for the EMAX TinyHawk III quadcopter with 15000kv power. It is comparable to the EMAX Tinyhawk III...
Tinyhawk III Replacement Parts - AIO
€109,99 EUR
EMAX Tinyhawk III AIO FC-ESC-VTX Main Board Replacement Parts This is EMAX TinyHawk III TinyWhoop AIO FC Replacement Board ( FC , ESC , VTx All In One) Package Included:...
EMAX Tinyhawk II Freestyle Parts - Top Plate
€9,99 EUR
Characteristics
Brand: EMAX
Item Name: Emax Tinyhawk II Freestyle Top Plate
Material: Carbon Fiber
Package Included
1x Emax Tinyhawk II Freestyle Top Plate
lens for Nebula Nano/Kangaroo 12M 7G CADDX FPV
€12,99 EUR
Lens for Nebula Nano/Kangaroo 12M 7G CADDX FPV Note: One tarsier requires two lenses. The upgraded lens works with both Tarsier V1 and Tarsier V2. Package Included Caddx Lens for...
Baby ratel / loris 4k replacement lens
€11,99 EUR
Replacement lens Baby ratel /loris 4k Caddx M8 Replacement Lens, for Baby Ratel 1.8mm and Loris 4k Caddx M8 Replacement Lens, for Baby Ratel 1.8mm and Loris 4k Specifications Goal:...
1.8mm lens for Ratel mini CADDXFPV
€11,99 EUR
1.8mm Lens for Ratel mini CADDXFPV Note: One tarsier requires two lenses. The upgraded lens works with both Tarsier V1 and Tarsier V2. Package Included 1x 1.8mm Lens for Ratel...
1.66mm lens for Ratel CADDXFPV
€12,99 EUR
1.66mm Lens for Ratel CADDXFPV
Package Included
1x 1.66mm Lens for Ratel V1
7G lens for Baby Turtle/Whoop CADDXFPV
€12,99 EUR
1.8mm HD lens with upgraded 7G glass
Package Included
7G Goal for Baby Turtle/Whoop CADDXFPV
2.1mm Lens for Ratel V1\Turtle V2
€12,99 EUR
2.1mm Lens for Ratel V1\Turtle V2 Note: One tarsier requires two lenses. The upgraded lens works with both Tarsier V1 and Tarsier V2. Package Included 1x 2.1mm Lens for Ratel...
TBS CROSSFIRE MICRO RX-EXTENDED ANTENNA
€5,99 EUR
Extended version of the Micro RX antenna to fit your larger rigs. Extended version of the TBS Crossfire Micro RX antenna. Snap-in installation with the U.FL standard. SPECIFICATIONS Total length...
iFlight SucceX E Mini F7
€79,99 EUR
iFlight SucceX E Mini F7 V1.4 The iFlight SucceX-E Mini F7 flight controller does not require any additional soldering to your digital VTX as it already has a plug-and-play connection...
iFlight BLITZ Mini F4
€69,99 EUR
iFlight BLITZ Mini F4 Improved circuit design, better components and less electrical noise! DJI HD VTX Connector (Plug-and-Play / No Soldering Required) FC LED indicators for visual debugging Technical specifications...
External screw set and internal screw set for TX16S and TX16S MKII
€4,99 EUR
External screw set Internal screw set Package Included 1 * TX16S External Screw Set (This set cannot be sold in pieces) OR 1 * TX16S Internal Screw Set (this set...
TX16S MKII front speaker
€4,99 EUR
the TX16S and TX16S MKII front speaker.
Package Included
1 * TX16S MKII Front Speaker
BETAFPV 1805 1550KV (4 pieces)
€69,99 EUR
BETAFPV 1805 1550KV BETAFPV 1805 1550KV series brushless motors are great for 6S power Combined with 35A AIO Brushless FC, it will provide you with huge output power to build...
T-Motor Cinematic F30A 4in1 ESC
€54,99 EUR
T-Motor Cinematic F30A 6S 4IN1 ESC The T-Motor Cinematic F30A 6S BLHeli32 4-in-1 ESC is loaded with power! The Cinematic F30A 4-in-1 ESC features a high-performance 32-BIT master control and...
REPLACEMENT SWITCH TBS TANGO2 / MAMBO (MOMENTARY)
€3,99 EUR
Momentart replacement switch for Tango 2 or Mambo
Momentart replacement switch for Tango 2 or Mambo
Package Included
1pc Momentart replacement switch for Tango 2 or Mambo
BetaFPV Twig XL
€279,99 EUR – €319,99 EUR
TWIG XL FPV Toothpick TWIG XL FPV Toothpick Quad is the first joint quad with Racer X FPV since February 2020. A high-performance FPV racing drone with an outstanding thrust-to-weight...
Skystars KO25 25A Mini 4in1 ESC
€39,99 EUR
Skystars KO25 25A BLHeli_S 3-6S 4-in-1 ESC - Mini 20x20 The Skystars Skystars KO25 25A BLHeli_S 3-6S 4-in-1 ESC comes with BLHeli_S firmware, supports DShot DShot300/600, and this ESC is...
TINY WHOOP DWARF CANOPY
€9,99 EUR
Special Glow Edition of the low profile lightweight canopy for the Tiny Whoop Nano.
SPECIFICATIONS
Weight: 0.35g
Material: PVC
Dimensions (WxDxH): 40 x 34 x 20 (mm)
X9 Lite Monitor Support
€14,99 EUR
This is a remix of the watch mount for the FrSky X9D radio from mcneely19 but the hole has been resized so it fits the FrSky X9 Lite radio which...
Defender 25 iflight 4S HD
€759,99 EUR – €799,99 EUR
Defender 25 iflight 4S HD iFlight Defender 25 is a 4S 2.5" Sub250 drone with DJI O3 FPV air unit. After 2 years with the highly successful ProTek series, iFlight...
Emax Tinyhawk II Freestyle 1S Battery Tray
€6,99 EUR
Emax Tinyhawk II Freestyle 1S Battery Tray Simple 1S Battery Box with Antenna Holder for Emax TinyHawak II freestyle racing drone. The print is made of TPU.Filling: 100% Package Included...
SainSmart Flexible TPU 3D Printing Filament, 1.75mm, 0.8kg, Dimensional Accuracy +/- 0.05mm
€34,99 EUR
SainSmart TPU filament Printing Tips: When using TPU filament, a direct drive extruder is recommended as it can produce higher quality parts and avoid jams. A Bowden extruder can also...
TX16S Mark II CNC Upgrade Set
€81,95 EUR
TX16S Mark II CNC Upgrade Set. This accessory is only suitable for TX16S Mark II Hall Gimbal Edition products. You can also choose the V1 TX16S CNC Upgrade Parts Set...
Foxeer Aura 4" Freestyle Frame Kit
€59,99 EUR
Foxeer Aura 4" Freestyle Frame Specifications Material: Toray T700 carbon with silky coating Wheelbase: 192 mm Mounting hole Medium: 25.5mm M2; Rear: 20x20mm/25.5*25.5mm M2 Size: Camera size 19*19/20*20mm Weight: 101g...
NewBeeDrone 0703 16420kv - Silver Edition (Set of 4)
€64,99 EUR
NewBeeDrone 0703 16420kv - Silver Edition (Set of 4) Introducing the next addition to the NewBeeDrone Brushless Whoop motor series, the 0703 16.420kv Silver Edition! This option is for those...
NewBeeDrone 0802 14000KV
€59,99 EUR
NewBeeDrone 0802 Brushless Motors 14000KV - Unibell Espresso Edition (Set of 4) This is our 2nd generation motor design, we use unibell on this motor as we move to double...
DRONE INDOOR RACE PACK
€19,99 EUR
Create an indoor playground with this modular running track. The Drone Indoor Race Pack is a flexible system of gates and bars that allows you to create the ultimate racing...
Artillery® GeniusPro 220*220*250 mm
€359,99 EUR
Characteristics: Print size 220*220*250mm Filament run-out detection, power cut function With colorful TFT touch screen, easy to operate. Short-range driver extruder, volcano nozzle. Feed smoothly and support flexible filament. Dual...
HGLRC DS230 drone FPV
€329,99 EUR – €369,99 EUR
HGLRC DS230 Drone Soccer FPV Analog Version Zeus Nano 350mW VTX Caddx Ant Eco Characteristics * Long battery life performance to meet various scenarios; * Spherical frame made of explosion-proof...
858D BGA hot air gun
€74,99 EUR
Specific: Supply voltage: 220V Plug type: EU Fan: brushless fan Wind quantity: 120L/m(MAX) Temperature range: 100°-450° Discharge Feature: LED indicator light Handle length: 120cm Noises:<45db Weight: 1.3KG Package Included 1x...
IMPULSERC APEX 7 INCH ARM SET
€44,99 EUR
4 pack Apex 7" arms with 5.5mm carbon arms
Package Included
4x7 inch Replacement Arms for Impulserc Apex
Avatar Walksnail coaxial cable 9 cm
€14,99 EUR
Avatar Walksnail 9cm Coaxial Cable The Walksnail Avatar 9cm Coaxial Cable is a replacement or spare part for the Walksnail Avatar HD Nano Camera. Note: Back case is not included....
Diatone Taycan 6S C3.1 LED 3" analogue
€359,99 EUR – €399,99 EUR
Diatone Taycan 6S C3.1 LED 3" analogue The Diatone Taycan 6s C3.1 LED 3″ Analog CineWhoop with RunCam Phoenix 2. The Diatone Taycan C3.1 Analog is a high performance 3"...
Replacement arms for X-Knight 5 V2 (2 pieces)
€12,99 EUR
Description
arm replacement X-Knight 5 V2
Specifications
5'' mounting holes 16×16 or 19×19
Package Included
x2 Replacement Arm for X-Knight 5 V2
Whoop Micro Brushless Beta75X V2 chassis
€12,99 EUR
Whoop Micro Brushless Beta75X V2 frame Compared with Beta75X frame, Beta75X V2 frame is only 5.6g, lighter, and the center of gravity of V2 frame is more concentrated. Increased the...
GEPRC CineLog35 GoPro 8/9/10 TPU Mount
€29,99 EUR
Specifications:
Item: GEPRC CineLog35 GoPro 8/9/10 Mount
Suitable quadcopter: CineLog35
Suitable Camera: GoPro 8/9/10
Package Included
Universal GoPro 8/9/10 mount.
STP Armor 5″ 215mm Frame Kit
€73,76 EUR
STP Armor 5″ 215mm Characteristics Ultra-lightweight protective case customized to protect Denso; USB parameter adjustment of port-style design is more convenient Air guide groove design, easy for air circulation, improve...
PAIR X-AIR 5.8 MK II FOR SHARK BYTE HD Combo stubby
€99,99 EUR
PAIR X-AIR 5.8 MK II FOR SHARK BYTE HD Combo stubby Swap the included sharbyte FPV system patch antennas for high quality X-air circular polarized directional antennas! Swap out the...
Runcam Micro V2 HDZero (WITHOUT MIPI CABLE)
€69,99 EUR
Runcam Micro V2 HDZero (WITHOUT MIPI CABLE) The Runcam Micro V2 HDZero camera is a 4:3 and 16:9 selectable high definition 720p60 camera designed for the HDZero VTX. Runcam Micro...
