Prodotti Coupon

Adjustable GOPRO 8 support in IFLIGHT tpu A GoPro Hero 8 camera mount (0~40°) for iFlight Nazgul5, SL5, TITAN XL5, DC5 or similar frame. Check out all our 3D TPU...

Gemfan Hulkie 5055S-3 Characteristics Material: PC Weight: 5.19 g Pitch: 3.5 inches Propeller diameter: 128.53 mm Center thickness: 7.5 mm Center hole diameter: 5mm Adaptive Motor:2206-2300 Package Included 2x CW...

IFlight BLITZ Mini ATF435 FC Specifications MCU: Muslim Gyroscope: BMI270 Barometer: DPS310 OSD Chip: AT7456E Flash: 16MB (Blackbox flash) UARTS: 6 Motor outputs: 4x (SH1.0 connector) I2C Series: SDA/SLA Bearings...

HQProp D4X5X3 for Cinewhoop Specifications Propeller diameter: 4 inches Intonation: 5 Blades: 3 Material: Polycarbonate Weight: 4.6 g Hub diameter: 13mm Hub thickness: 6.8mm Shaft: 5mm Adapter rings: NO Package...

GemFan FLASH 2540 Gemfan Flash propellers are designed specifically for high speed racing. The reverse tip design helps reduce blade tip vortex and the light weight of the propeller means...

NewBeeDrone Micro Race Gate - Square The perfect gate to use for racing AcrboBees, TinyWhoops or any other micro quad with bright, easy to see patterns. Each gate is made...

Standoff double round knurled spacers M3 x 35mm Technical specifications is it customized: Yes Model Number: Aluminum Standoff DIY Supplies: Metalworking Origin: CN (Origin) Model Number: M3*L 35mm Material: Aluminum...

DPS-1200FBA 1200W 100A Switching Power Adapter for ISDT T8 icharger X6 308 4010 Charger Technical specifications Model: DPS-1200FB A Body material: Metal Color: Silver Switching power supply size: 240*87*37mm Board...

DarwinFPV X9 9" long range FPV drone Darwin X9 is a 9-inch heavy-duty FPV drone. It is equipped with 2812 motors, 1000mW analog video transmission, F4 flight control and 100A...

Flywoo Gopro front screen protector for GP9 / GP10 / GP11 Gopro naked Gopro Front Screen Protector for Flywoo Compatible with GP9/GP10/GP11 Gopro Naked Action Camera. PS The action camera...

Flywoo Action Camera GP9/GP10 Lite BEC V1.2

Suitable for Flywoo GP9/GP10, Gopro Hero 9\10 Flywoo GP9/GP10 camera module Flywoo camera module, adaptable replacement part and compatible with GP9/GP10 and GoPro 8/9.

Foxeer Echo 2 Max 13dBi 5.8G/2.4G Foxeer Echo 2 Max 13dBi 5.8G/2.4G Dual Frequency High Gain Directional FPV Antenna Specifications Frequency Dual frequency 5.8GHz/2.4GHz Gain 13dBi Axial ratio Near 1...

Package Included 1 SpeedyBee Master 5 V2 rear arm or 1 SpeedyBee Master 5 V2 front arm

T-Motor Mini Racer 20×20 F7 Flight Controller The T-Motor Mini Racer F7 is a 3-6S 20×20 mini flight controller with a 16MB Blackbox flash memory, 5V.2A BEC and a MPU6000...

ELRS 2.4GHz Micro Receiver The BETAFPV micro receiver is based on the ExpressLRS project, an open source RC link for RC applications. ExpressLRS aims to achieve the best possible link...

SkyZone DVR card for SKY03 glasses

BT2.0-PH2.0 adapter cables BT2.0 Connector : The most significant revolution in Whoop 1S drone. Not sure if it's worth upgrading to BT2.0? Check out more from Joshua Bardwell' video- Proof...

Gemfan 31mm 3-Blade Micro Whoop Propellers(1.0mm Shaft) These 31mm propellers are only customized for 65mm brushless drones with 1.0mm motor shaft. The recommended engine is Engine 0603 and engine 080X...

GemFan Hurricane 2009-3 blades 1.5 mm - Purple Specifications Inches: 2 inches Pitch: 0.9 inch Weight: 0.4 g Mounting: 1.5mm T-Attachment Colors: transparent transparent gray, transparent blue, orange, purple Recommended...

Tinyhawk III Spare Parts - 15000KV Motor Characteristics It is a replacement motor for the EMAX TinyHawk III quadcopter with 15000kv power. It is comparable to the EMAX Tinyhawk III...

EMAX Tinyhawk III AIO FC-ESC-VTX Main Board Replacement Parts This is EMAX TinyHawk III TinyWhoop AIO FC Replacement Board ( FC , ESC , VTx All In One) Package Included:...

Characteristics Brand: EMAX Item Name: Emax Tinyhawk II Freestyle Top Plate Material: Carbon Fiber Package Included 1x Emax Tinyhawk II Freestyle Top Plate

Lens for Nebula Nano/Kangaroo 12M 7G CADDX FPV Note: One tarsier requires two lenses. The upgraded lens works with both Tarsier V1 and Tarsier V2. Package Included Caddx Lens for...

Replacement lens Baby ratel /loris 4k Caddx M8 Replacement Lens, for Baby Ratel 1.8mm and Loris 4k Caddx M8 Replacement Lens, for Baby Ratel 1.8mm and Loris 4k Specifications Goal:...

1.8mm Lens for Ratel mini CADDXFPV Note: One tarsier requires two lenses. The upgraded lens works with both Tarsier V1 and Tarsier V2. Package Included 1x 1.8mm Lens for Ratel...

1.66mm Lens for Ratel CADDXFPV Package Included 1x 1.66mm Lens for Ratel V1

1.8mm HD lens with upgraded 7G glass Package Included 7G Goal for Baby Turtle/Whoop CADDXFPV

2.1mm Lens for Ratel V1\Turtle V2 Note: One tarsier requires two lenses. The upgraded lens works with both Tarsier V1 and Tarsier V2. Package Included 1x 2.1mm Lens for Ratel...

Extended version of the Micro RX antenna to fit your larger rigs. Extended version of the TBS Crossfire Micro RX antenna. Snap-in installation with the U.FL standard. SPECIFICATIONS Total length...

Replacement arm for AOS LR5 This 5″ frame is therefore ideal for long-range flying or freestyle. Characteristics Replacement arm for the AOS RC LR5 frame , an ultra-lightweight 5" frame...

iFlight SucceX E Mini F7 V1.4 The iFlight SucceX-E Mini F7 flight controller does not require any additional soldering to your digital VTX as it already has a plug-and-play connection...

iFlight BLITZ Mini F4 Improved circuit design, better components and less electrical noise! DJI HD VTX Connector (Plug-and-Play / No Soldering Required) FC LED indicators for visual debugging Technical specifications...

External screw set Internal screw set Package Included 1 * TX16S External Screw Set (This set cannot be sold in pieces) OR 1 * TX16S Internal Screw Set (this set...

the TX16S and TX16S MKII front speaker. Package Included 1 * TX16S MKII Front Speaker

BETAFPV 1805 1550KV BETAFPV 1805 1550KV series brushless motors are great for 6S power Combined with 35A AIO Brushless FC, it will provide you with huge output power to build...

T-Motor Cinematic F30A 6S 4IN1 ESC The T-Motor Cinematic F30A 6S BLHeli32 4-in-1 ESC is loaded with power! The Cinematic F30A 4-in-1 ESC features a high-performance 32-BIT master control and...

Momentart replacement switch for Tango 2 or Mambo Momentart replacement switch for Tango 2 or Mambo Package Included 1pc Momentart replacement switch for Tango 2 or Mambo

TWIG XL FPV Toothpick TWIG XL FPV Toothpick Quad is the first joint quad with Racer X FPV since February 2020. A high-performance FPV racing drone with an outstanding thrust-to-weight...

Skystars KO25 25A BLHeli_S 3-6S 4-in-1 ESC - Mini 20x20 The Skystars Skystars KO25 25A BLHeli_S 3-6S 4-in-1 ESC comes with BLHeli_S firmware, supports DShot DShot300/600, and this ESC is...

Special Glow Edition of the low profile lightweight canopy for the Tiny Whoop Nano. SPECIFICATIONS Weight: 0.35g Material: PVC Dimensions (WxDxH): 40 x 34 x 20 (mm)

EU power cable for your chargers.

This is a remix of the watch mount for the FrSky X9D radio from mcneely19 but the hole has been resized so it fits the FrSky X9 Lite radio which...

Defender 25 iflight 4S HD iFlight Defender 25 is a 4S 2.5" Sub250 drone with DJI O3 FPV air unit. After 2 years with the highly successful ProTek series, iFlight...

Emax Tinyhawk II Freestyle 1S Battery Tray Simple 1S Battery Box with Antenna Holder for Emax TinyHawak II freestyle racing drone. The print is made of TPU.Filling: 100% Package Included...

SainSmart TPU filament Printing Tips: When using TPU filament, a direct drive extruder is recommended as it can produce higher quality parts and avoid jams. A Bowden extruder can also...

TX16S Mark II CNC Upgrade Set. This accessory is only suitable for TX16S Mark II Hall Gimbal Edition products. You can also choose the V1 TX16S CNC Upgrade Parts Set...

Foxeer Aura 4" Freestyle Frame Specifications Material: Toray T700 carbon with silky coating Wheelbase: 192 mm Mounting hole Medium: 25.5mm M2; Rear: 20x20mm/25.5*25.5mm M2 Size: Camera size 19*19/20*20mm Weight: 101g...