ORT Helical 3 turns ORT 3 Turn Helical is designed to match the circular transmitter antenna. The Helical has a better axial ratio than the cheap PCB printed circular patch...
A pack of two Molicel P26A 18650 rechargeable lithium ion batteries. The P26A packs 2600mAh of energy storage and 35A of discharge power, making it ideal for many applications. Characteristics...
NewBeeDrone HummingBird F4 V2 BNF/ ELRS Following the success of the Hummingbird F4 V1 HMB, the NewBeeDrone HummingBird F4 V2 brings some much-requested modifications to the table. Featuring brushless motors,...
Programmable SpeedyBee LEDs 2812 Arm (4 pieces) The SpeedyBee 2812 programmable LEDs include both solder points and cable connectors that allow them to be easily positioned on the quad. The...
Note: The chip of GOKU GM10 V3 GPS is M1005. Only BF4.3x version firmware can use the Ublox protocol. Firmware BF4.2x and earlier can only use NMEA protocol But there...
Gemfan Airgate Cube 3 - Compact FPV Racing Gate The Gemfan Airgate Cube 3 is an FPV racing gate designed to enhance the drone racing experience. With dimensions of 75...
The GEPRC team specially designed a new ND16 filter for GoPro Hero 8 naked, which can reduce the light input of the camera sensor without changing the color of the...
Gemfan MCK 51466 Hurricane Crystal Get ready to race with Gemfan's durable 51466 Hurricane 3-Blade Propeller. The 51466 Hurricane series was designed for high-speed agile flight with its incredibly low...
EMAX Nanohawk 1S BNF In an effort to push the boundaries of miniaturization of the FPV experience, EMAX went to the drawing board to design the smallest quadcopter possible in...
DJI O3 Air Unit Antenna The DJI O3 Air Unit antenna is a dual-band dual-polarized antenna with I-PEX connector. The O3 antenna is small and lightweight to ensure long-distance transmission...
Gemfan 2020 4 blade propellers, 1.5mm shaft Gemfan 2020 4-blade propellers are perfect for 85mm brushless whoop drone. It is lighter but durable enough, providing pilots with a high-efficiency flight...
10 Piece Diamond File Set - Perfect for Precision Sanding The 10 Piece Diamond File Set is designed for precision sanding and finishing of materials such as metal, wood and...
iFlight Tool Bag Looking for a high quality portable tool bag? Characteristics: The bag is made of durable, premium quality EVA material, crushproof, shockproof and water resistant which provides adequate...
BetaFPV X Gemfan 31mm 4 blades These 31mm propellers are only customized for 65mm brushless drones which have 0.8mm motor shaft. The recommended motors are 080X motors such as 0802....
BetaFPV LiteRadio 3 Pro BetaFPV LiteRadio 3 Pro Radio Transmitter: An open source radio remote controller that supports the EdgeTX system. It comes with Hall gimbals, featuring four precision bearings,...
Description:
10pcs Metric Thread Allen Head Stainless Steel Screws
Dimensions
pitch 0.5 mm
Model:
Length: 2.0cm
The package includes:
10 x M3 Srews Set
VAS 5.8GHZ ION PRO (SHORT W/SMA CONNECTOR) - LHCP The Ion Pro is the latest enhancement to the VAS Ion series antennas incorporating a more sophisticated element system for a...
TinyTrainer Frame Kit The TinyTrainer was developed for Evan “Headsup” Turner to practice flying large drones in his small backyard, but it has become so much more. The flight characteristics...
Torlvol FREESTYLE TRANSMITTER CASE The Torvol RC transmitter case fits like a glove and keeps your controller safe. Stores a FrSky Taranis X9DP, Spektrum DX9 or similar form factor transmitter...
TBS Triumph Stubby RP-SMA (LHCP 2PCS) While other antennas rely on copycat designs, the TBS Triumph takes a giant leap in 5.8GHz antenna technology. Video Aerial Systems LLC (IBcrazy) and...
TBS SOURCE TWO V0.1 SOURCE TWO is the second open source frame, this time focused on lightweight and racing. The frame is donated to the community to empower creators and...
TBS SOURCE V SOURCE V is an open source vertical racing frame started by Team BlackSheep. The frame is donated to the community to empower creators and more quickly integrate...
Tattu 450mAh 4S 75C XT30 Tattu 450mAh 14.8V 45C 4S1P Lipo Battery Pack with XT30 Connector is the best choice for H-Frame micro quads. This lipo comes with 75c discharge...
TATTU 650mAh 75C 7.4V 2s Lipo Battery Pack with XT30 Plug comes with industry standard XT-30 plug, compatible with LiPo balanced chargers for your size 120. Characteristics Stunning stacking technology...
The TBS FPV Table V2 is the ultimate folding table for FPV drone pilots. Crafted with durability and simplicity in mind, the surface features 6 aluminum rods and 6 aluminum...
T-Motor V45A V2 3-6S BLHELI_32 4in1 ESC T-Motor consistent superior quality, full range of esc adopts premium high performance MOS, the MOS v2 is upgraded again with 15% improved performance....
T-Motor PACER V3 P2207 1750KV/1950KV/2080KV/2550KV The powerful T-Motor PACER V3 P2207 freestyle motor has become one of the most popular motors on the market. T-Motor has updated and upgraded their...
T-Motor F60 PROV-LV - 1950KV/2020KV the T-Motor F60 PRO V-LV engine offers higher speed with lighter weight. Choose a KV: 1950KV/ 2020KV VIDEO: My favorite engine!! T-Motor F60 Pro V-LV...
Soldering Helper – A convenient solution aid perfect for working on FC, ESC and various mini quad or general electronics projects. Specific Material: CNC aluminum alloy Universal joint tube length:...
SpeedyBee F405 Mini Stack BLS 35A 20x20 WIRING DIAGRAM AND MANUAL Utilizing an upgraded F405 flight controller chip with better performance than the F411, it features a built-in Bluetooth chip...
Designed for cross-border e-commerce 670PCS color heat shrink tube set INCLUDES ~60pcs - 1.0mm - 38mm red ~60pcs - 1.5mm - 38mm Black ~50pcs - 2.0mm - 38mm Yellow ~50pcs...
GEPRC SMART16 1.6 inch, currently available PNP, TBS Nano, FRSKY. SMART 16 continues the Phantom series' consistent lightweight design concept. The 1.5mm carbon fiber arm, with a 1mm top plate,...
GEP-TG Frame kit 79mm The GEP-TG chassis is carefully designed by the GEPRC team. It is very light and small in size. The weight of the frame is about 11g,...
The ARCHER M+ receiver features its small form factor and the new ACCESS protocol. ACCESS provides the lower latency and improved performance of our previous XM+ receivers. The ARCHER M+...
GemFan D90 5 blades Grey These GemFan D90 90mm 5-blade propellers are perfect for duct racing. These 3.5" propellers provide smoother control in flight, with a tighter pitch. Perfect for...
Gemfan D76 5-blade propeller with 5mm/1.5mm shaft BETAFPV and Gemfan D76 5-blade is a super efficient 3-inch 5-blade propeller. Perfect match with lower KV value motors, it will provide the...
Gemfan D51 whiskey 5 blades of 51 mm The Gemfan D51 is a 51mm micro propeller that comes with a 1.5mm shaft, 1.9″ pitch, T-mount style, 4.6mm center thickness and...
Foxeer Mini Cat 3 1200TVL The Foxeer Mini Cat 3 StarLight FPV camera, with its wide aperture night vision lens and LED enhancement, is a great option for night flights....
We often restock popular items or they may be returned by the other customers. If you would like to be
notified when this happens just enter your details below.
We respect your privacy and don't share your email with anybody.
×
Alert me if this item is restocked
Thank you, we have now received and recorded your request to be notified should
be restocked.