Sort by:
Nazgul Evoque F4 6S HD DJI O3
€699,99 EUR – €739,99 EUR
Nazgul Evoque F4 6S HD DJI O3 Another step forward in FPV imagery from DJI with the updated chassis and electronics. A new standard of Bind-And-Fly drones that are easy...
Nazgul Evoque F5 HD/Analog Frame Kit
€89,99 EUR
Nazgul Evoque F5 HD/Analog Frame Kit This was the slogan of our new approach to creating this piece of art! Fully protected, fully illuminated electronics, paired with all the latest...
Nazgul Evoque F5D V2 6S Analog
€399,99 EUR – €439,99 EUR
Nazgul Evoque F5D V2 6S Analog The Nazgul Evoque F5 V2 6S is one of the best pre-built drones and just got better! A new standard of Bind-And-Fly drones that...
Nazgul Evoque F6D V2 6S HD DJI O3
€899,99 EUR – €939,99 EUR
Nazgul Evoque F6D V2 6S HD DJI O3 (Deadcat) Our best prebuilt drone just got better! Another step forward in DJI FPV imagery with our updated chassis and electronics. A...
NewBeeDrone 0703 16420kv - Silver Edition (Set of 4)
€64,99 EUR
NewBeeDrone 0703 16420kv - Silver Edition (Set of 4) Introducing the next addition to the NewBeeDrone Brushless Whoop motor series, the 0703 16.420kv Silver Edition! This option is for those...
NewBeeDrone 0802 14000KV
€59,99 EUR
NewBeeDrone 0802 Brushless Motors 14000KV - Unibell Espresso Edition (Set of 4) This is our 2nd generation motor design, we use unibell on this motor as we move to double...
NewBeeDrone Balloon Gate (3-Pack)
€14,99 EUR
The new Balloon Gates are here to take your racing to the next level. Create a more dynamic and 3D looking track with these gates. Each package comes with ground...
NewBeeDrone BeeEye FPV Camera
€29,99 EUR
A replacement camera for the AcroBee. It can also be used as a replacement camera for other applications. (Camera holder not included). Technical specifications 600 TVL 120 degree viewing angle...
NewBeeDrone Y-cable 2S
€2,99 EUR
Designed to make a 2s pack with 2 x 1s batteries!
Package Included
1x Y-cable with 2S series connector
NewBeeDrone Flow 0802 27000kv (set of 4)
€64,99 EUR
NewBeeDrone Flow 0802 27000kv (set of 4) Specifications - 0802 Engine size - 27,000 kv (1S only) - 1mm shaft size - Lead wire soldering pads - JST-1.0 plugs installed...
NewBeeDrone HummingBird F4 V2 BNF/ELRS
€149,99 EUR
Following the success of the Hummingbird F4 V1 HMB, The V2 brings much requested modifications to the table. Featuring brushless motors, our legendary Beetle chassis, an updated Mark 3 camera,...
NewBeeDrone Micro Race Gate - Square
€39,99 EUR
NewBeeDrone Micro Race Gate - Square The perfect gate to use for racing AcrboBees, TinyWhoops or any other micro quad with bright, easy to see patterns. Each gate is made...
NewBeeDrone Micro Race Gate - Round
€39,99 EUR
The perfect gate to use for racing AcrboBees, TinyWhoops or any other micro quad with bright, easy to see patterns. Each gate is made from a super durable fabric, ensuring...
NewBeeDrone Nectar Connector PH2.0
€2,99 EUR
NewBeeDrone Nectar Connector PH2.0 Transparent battery cable The Nectar connector is a custom mold design with thicker plug walls that makes it literally impossible to plug a lipo in backwards...
NewBeeDrone Nitro Nectar Gold 300mAh 1S HV GNB27
€14,99 EUR
Nitro Nectar Gold Series HV Lipo Battery Series ! They use a different battery packaging technology that provides a better discharge rate for those who like to push the limit!...
NewBeeDrone Nitro Nectar Gold 300mAh 2S HV LiPo GNB27 (2 batteries)
€29,99 EUR
The Nitro Nectar Gold Series HV Lipo Battery Series ! They use a different battery packaging technology that provides a better discharge rate for those who like to push the...
NewBeeDrone SavageBee V1.8 Frame 65mm 3"
€29,99 EUR
NewBeeDrone SavageBee 3" Toothpick Frame The SavageBee chassis was specially designed to fit any NewBeeDrone brushless whoop flight controller to build a lightweight 1 or 2 second toothpick micro drone....
NewBeeDrone Tool Kit V1.6
€59,99 EUR
Update: The NewBeeDrone Tool Kit now comes with an M5 prop tool! This is the tool kit you've been waiting for! Never again will you find yourself out in the...
NewBeeDrone x Team BlackSheep AcroBee65 BLV4 BNF
€209,99 EUR
NewBeeDrone x Team BlackSheep AcroBee65 BLV4 BNF CRSF 27000KV Technical specifications Drone size: 65mm Flight controller: BeeBrain BLV4 CRSF built in VTX and Crossfire receiver chassis: Brushless Cockroach65 chassis (solid...
NewBeeDrone XT30 Lipo Pigtail 20AWG
€2,99 EUR
20awg cable with XT30 Newbeedrone
Package Included
1pc 20AWG silicone wires 9.5cm long (about 3.75 inches) connected to an XT30 connector.
NITECORE UM2 Smart Quick Charger for AA AAA 18650 21700 26650
€22,99 EUR
Specifications: Brand NITECORE Model UM2 Entrance DC 5V / 2A 9V Output voltage 4.35V±1% / 4.2V±1% Output current QC Mode: 1,500mA * 2 (MAX) Standard mode: 1,000 mA * 2...
Walksnail Avatar HD Lens
€12,99 EUR
The Walksnail Avatar HD Camera Lens is a replacement or replacement for the Walksnail Avatar HD Camera . Characteristics Fits Walksnail Avatar HD camera 2.1mm camera lens Specifications Compatibility: Walksnail...
7G lens for Baby Turtle/Whoop CADDXFPV
€12,99 EUR
1.8mm HD lens with 7G upgraded glass
Package Included
7G lens for Baby Turtle/Whoop CADDXFPV
1.8mm lens for Ratel mini CADDXFPV
€11,99 EUR
Note: A tarsier needs two lenses. The updated lens works with both the Tarsier V1 and Tariser V2.
Package Included
1x 1.8mm lens for Ratel mini CADDXFPV
Baby ratel / loris 4k replacement lens
€11,99 EUR
Caddx M8 replacement lens, for Baby Ratel 1.8mm and Loris 4k Caddx M8 replacement lens, for Baby Ratel 1.8mm and Loris 4k Specifications Objective: 1.8 Package Included Caddx M8 replacement...
Foxeer M12 2.5mm lens
€14,99 EUR
Foxeer M12 2.5mm Lens for Arrow / Monster / Predator / Falkor Camera for Mini / Full Size Foxeer high quality 2.5mm megapixel wide angle lens, suitable for Foxeer cameras,...
DJI CAMERA LENS / CADDX NEBULA PRO / NEBULA MICRO AND RATEL2
€9,99 EUR
Replacement lens for Caddx Nebula Micro, Nebula Pro, Ratel 2 and DJI FPV cameras.
Main features
Weight: 5g
Thread Size: M12
Package Included
1x lens
1x circlip
lens for Nebula Nano/Kangaroo 12M 7G CADDX FPV
€12,99 EUR
Note: A tarsier needs two lenses. The updated lens works with both the Tarsier V1 and Tariser V2. Package Included Caddx Lens for Nebula Nano M8 2.1mm / Kangaroo V2...
Lens for Polar Nano/Nebula Pro Nano CADDXFPV
€12,99 EUR
Note: A tarsier needs two lenses. The updated lens works with both the Tarsier V1 and Tariser V2. Specifications Weight: ~1g Diameter: M8 Package Included 1x lens for Polar Nano...
ORT DUAL SHIELD PRO 5.8GHZ (RHCP)
€39,99 EUR
Old Radio Transmissions (ORT) carefully designed the 5.8GHz Dual Pro Patch Antenna to fit all fat shark diversity receiver modules available on the market. This antenna consists of two micro...
6-turn helical ORT
€54,99 EUR
“Long Range Master” 6-turn ORT helical antenna (10dBi gain) The helical design has an impedance of 180ohm which is not matched by ORT's FPV system with 50ohm impedance. So the...
ORT NEW HELICAL 3 TURN
€49,99 EUR
ORT 3 Turn Helical is designed to match the circular transmitter antenna. The Helical has a better axial ratio than the cheap printed PCB circular patch antenna out there. If...
Headsup Five33 AXII 2 Antenna Package
€99,99 EUR
It is recommended to use this goggle combo in the "legacy" rapid fire mode for best results. This is the mode that Headsup personally uses and swears by the consistency...
Flywoo Ultra Grip Fpv Battery Pad 1PCS
€6,99 EUR
High quality adhesive battery pad for your LiPo batteries. These durable drum pads made of PU material can grip a battery at 90° on one side and even rotate 180°...
Drum Pad-FIVE33
€4,99 EUR
Description
Adhesive rubber battery pad for Switchback. Washable and sticky on both sides.
Package Included
1x Drum Pad-FIVE33
Anti-vibration silicone pad for engines
€5,99 EUR
[vc_row][vc_column][vc_column_text] 8 Pcs Silicone Anti-Vibration Pad for 13XX 22XX 23XX Motor RC Multirotor FPV Racing Drone Specific: Item Name: Anti-vibration Pad Material: Silicone Color: Transparent White Size: 18*18*1.5mm Weight: 0.4g/PC...
PAGODA 2 ORT STUBBY - X SERIES ANTENNA (WHITE)
€18,99 EUR
ORT is a new brand from Bali, Indonesia. Handmade and individually tuned. Pagoda 2 Stubby is a compact omnidirectional antenna for mounting on quads. ORT 5.8G Pagoda 2 Stubby X...
Panasonic NCR18650BD 3180mAh 10A
€9,99 EUR
Specifications Capacity: 3180mAh Nominal voltage 3.6V - 3.7V Voltage of charge cycle termination 4.20 V ± 0.05 V Charging current Maximum discharge: 10A Do not discharge to a depth greater...
Insulating panel to protect FC anti-conductive ESC
€1,99 EUR
Insulating panel to protect FC anti-conductive ESC Characteristics -It is suitable for isolated installation of flight controller, 4 in1 ESC, image transmission, power distribution board, etc. -Play the role of...
iFlight Nazgul Evoque F5 engine guards (left and right)
€19,99 EUR
iFlight Nazgul Evoque F5 crash bars (left and right) 3D printing of the iFlight Nazgul Evoque F5 Bumpers in TPU to protect the engines from impacts and damage during your...
ImpulseRC APEX 5" front bumper
€5,99 EUR
ImpulseRC APEX 5" front bumper This bumper leaves the bottom screws free to tighten and attaches to the frame using the first bottom hole in the frame. It also slides...
Front bumper for iFlight Nazgul Evoque F5D and F5X
€4,99 EUR
Front bumper for iFlight Nazgul Evoque F5D and F5X Designed to protect the front of your model from accidental impacts for the iFlight Nazgul Evoque F5D and F5X. The chassis...
TBS Source One V5 front bumper
€4,99 EUR
TBS Source One V5 front bumper Designed to protect the front of your model from accidental impacts for the TBS source one V5. The SOURCE ONE is a wide stance...
Rear bumper and ELRS antenna holder for iFlight Nazgul F5
€4,99 EUR
Rear bumper and ELRS antenna holder for iFlight Nazgul F5 Designed to protect the front of your model from accidental impacts for the iFlight Nazgul Evoque F5D and F5X. The...
Tinyhawk III Replacement Parts - AIO
€109,99 EUR
EMAX Tinyhawk III AIO FC-ESC-VTX Main Board Replacement Parts This is EMAX TinyHawk III TinyWhoop AIO FC Replacement Board ( FC , ESC , VTx All In One) Package Included:...
EMAX Tinyhawk II Freestyle Parts - Bottom Plate
€14,99 EUR
Characteristics
Brand: EMAX
Item Name: Emax Tinyhawk II Freestyle Bottom Plate
Material: Carbon Fiber
Package Included
1x Emax Tinyhawk II Freestyle Bottom Plate
EMAX Tinyhawk II Freestyle Parts - Top Plate
€9,99 EUR
Characteristics
Brand: EMAX
Item Name: Emax Tinyhawk II Freestyle Top Plate
Material: Carbon Fiber
Package Included
1x Emax Tinyhawk II Freestyle Top Plate
