SpeedyBee F745 AIO 35A BLHeli_S
The SpeedyBee F745 AIO includes an F745 flight controller and a 35A ESC. Equipped with a BMP280 barometer, OSD, 8MB Blackbox memory and MPU600 gyro... this AIO board is the perfect addition to your FPV build.
Characteristics
- Flashing Wireless ESC Firmware + Complete BLHeli_S Setup
- Flashing Wireless FC Firmware + Full Betaflight Setup
- Powerful and durable 35A 6S ESC with TOSHIBA MOSFET
- 4 UARTS + Barometer + I2C pad + 8MB BlackBox flash
- Change motor directions wirelessly
- DJI Plug for Easier Digital Building
- Powerful F745 FC + 35A ESC
Technical specifications
- Dimensions: 36.5mm (length) x 36.5mm (width) x 7mm (height), recommended for 3.5" or larger quad
- Mounting pattern: 25.5 x 25.5mm, hole diameter 3mm
- Power input: 3S - 6S Lipo
- Weight: 10.1 g
FC
- USB Connection: You need to solder a USB TYPE-C module to the D+, D-, GND pads.
- 5V Output: 4 groups of 5V output. The total current load is 2.5A.
- SmartPort: Use any UART TX pad for SmartPort function.
- Bluetooth BLE: Supported. Used for parameter configuration
- UART: Full UART *4 (UART1, UART2, UART3, UART4)
- 3.3V Output: Supported. Current load up to 500mA.
- Supported flight controller: BetaFlight (default)
- Firmware Target Name: SPEEDYBEE F745AIO
- Buzzer: BZ+ and BZ- pad used for 5V buzzer
- BetaFlight Camera Control Pad: Yes (CC Pad)
- Wireless FC Flash Firmware: Supported
- Download/Analyze Blackbox: Supported
- BOOT button: Used to enter DFU mode
- Current sensor: Supported. Scale=256
- DJI Air Unit 6-pin Connector: Built-in.
- LED Pad Used for WS2812 LED
- ESC Telemetry UART: None
- RSSI input: not supported
- Flash (for BlackBox): 8 MB
- ESC Signals M1 - M4
- IMU (gyroscope): MPU6000
- Barometer: BMP280
- MCU: STM32F745
- 9V Output: None
- OSD: Supported
- I2C: Supported.
ESC
- Current sensor: supported (Sacle=256)
- ESC Protocol: DSHOT300/600
- Firmware: BLHeli_S JH40
- Continuous current: 35A
- Burst current: 45A (5S)
- Power input: 3-6S LiPo
- Output power: VBAT
IMPORTANT NOTES
- Make sure the slightly larger size of the AIO can fit your quad! The size of this AIO is 36.5(length)*36.5(width)*7.0(height)mm. We suggest you use this AIO on your 3.5" to 5"/long throw cinewhoops or light quads. For quads smaller than 3.5", you should check carefully if your quad has enough space for this AIO.
Package Included
- 1x SpeedyBee F745 AIO flight controller - F745 FC + 35A BLHeli_S 3-6S ESC
- 1x External USB port module (cable length: 5mm)
- 5 x M2 6.6mm Anti-Vibration Silicone Cable Grommets
- 1 XT30 power cable (length: 7cm)
- 1x Manual and App download card
- 5 x M2 12mm screws (length).
- 1 x DJI 6-pin Air Unit Cable
- 1 x 35V 470uF capacitor
- 5x M2 silicone o-rings
- 5 M2 Nylon Hex Nuts
Manual(EN)SHIPPING
Italy
• Express Shipping (1-4 working days)
• Free for orders over €150.00
• €9.99 for orders under €150.00
Europe (European Union)
• International Express Shipping (2-6 business days)
• €29.99 for all orders
PAYMENT METHODS
On Drone24hours.com you can use the following payment methods:
- Paypal
- Visa
- Visa Electron
- CartaSi
- Postepay
- MasterCard
- American Express
- Paypal prepaid cards linked to the Visa or Mastercard circuit
- Cash on delivery
Return Policy
You can return products that you are not satisfied with within 14 days of receiving your order. To be eligible for a return, the product must be in the same condition in which you received it, unworn or unused, with tags and in the original packaging. You must also have your receipt or proof of purchase.
Damaged or incorrect goods
In case you receive wrong or damaged goods, please contact us immediately within 14 days of receiving your order. Please send an email with photos and videos of the product, a detailed description of the problem and what you have done to solve it. You may be asked to return the item. For confirmed defective goods, we will send a replacement free of charge.
Exceptions / Non-returnable items
Some items cannot be returned, such as perishable goods (food, flowers, plants), personalized or made-to-order products, and personal care products (cosmetics). We do not accept returns on hazardous materials, flammable liquids, or gases. We do not accept returns on sale items or gift cards.
Exchanges
If you wish to exchange an item, the fastest way is to return it and place a new order for the new item.
Under the 24-month Legal Guarantee, Drone24Hours is responsible to the consumer for any defects in conformity that cannot be detected at the time of purchase.
The lack of conformity exists when the product is not suitable for the use for which it is normally intended, does not conform to the description or does not possess the qualities promised by the seller, does not offer the qualities and performances usual for a good of the same type, is not suitable for the particular use desired by the consumer if brought to the attention of the seller at the time of purchase and accepted by the seller (art. 129 of the Consumer Code).
Any lack of conformity which becomes apparent within 24 months of the date of purchase of the goods must be reported within 2 months of the date of discovery of the defect.
Unless proven otherwise, it is presumed that any lack of conformity that becomes apparent within 6 months of delivery of the goods already existed on that date. In the event of a lack of conformity, the consumer has the right to have the conformity of the goods restored, free of charge, by repair or replacement (art. 130 of the Consumer Code).
The consumer may ask, at his choice, the seller to repair the goods or replace them, free of charge in both cases, unless the requested remedy is objectively impossible or excessively expensive compared to the other. Repairs or replacements must be carried out within a reasonable time from the request of the Consumer; the average time for returning the product to the Consumer is 20 days.
If Drone24hours is unable to return the repaired product within the maximum period of 60 days, the consumer may request one of the alternative remedies (replacement, termination of the contract, price reduction).
Drone24Hours will send the product for any repairs to the Technical Assistance Center authorized by the Manufacturer.
What happens if the Service Center does not find the lack of conformity?
If the lack of conformity is not found, Drone24Hours will communicate the estimate to the Customer, who can decide whether or not to carry out the repair at his own expense. In this case, any transport costs and diagnosis of the defect requested by the Assistance Center will be borne by the Customer.
