SpeedyBee F7 V3 Stack - F722 FC + 50A BLHeli_32 128K ESC - 30x30
The SpeedyBee F7 V3 stack includes a F722 flight controller and a 50A 128K ESC. Equipped with a BMP280 barometer, OSD, 500MB memory Blackbox, an integrated LiPo FC monitoring system and many other features, this stack is the perfect addition to your FPV build.
Characteristics
- 1500uF Low ESR Capacitor with TVS Shielding Diode
- 500 MB of integrated Blackbox flash memory
- 8 Perfect motor power for X8 Cinelifter
- Mounting diagram 30.5 x 30.5 mm
- LiPo FC Monitoring System
- SpeedyBee 50A 128K ESC
- CNC heatsink shield
- Built-in barometer
- PWM at 128KHz
- 4 LED plugs
- F722 FC
- Buzzer
Specifications
SPEEDYBEE F7 V3 FLIGHT CONTROLLER
- Output Power:
- 1) 10 groups of 5V output, three +5V pads and 1 BZ+ pad (used for Buzzer) on the front side, and 6 +5V outputs included in the connectors on the bottom side. The total current load is 2A.
- 2) 2 groups of 9V output, one +9V pad on the front side and the other included in a connector on the bottom side. The total current load is 4A.
- 3) Supported. Designed for GPS receiver and module even when the FC is powered by USB port. Current load up to 1A supported. Designed for 3.3V input receivers. Current load up to 500mA.
- WiFi support, used for data transfer, such as firmware flashing and Blackbox analysis.
- I2C: Supported. SDA & SCL pad on the front side. Used for magnetometer, sonar, etc.
- Supports flight controller firmware: BetaFlight (default), EMUFlight, INAV
- ESC signal M1 - M4 on the bottom side and M5-M8 on the front side.
- LED: Used for WS2812 LEDs controlled by Betaflight firmware.
- UART: 5 sets (UART1, UART2, UART3, UART4, UART6)
- DJI Air Unit Plug: One full DJI Air Unit JST slot on board
- BLE support, used for flight controller configuration
- Buzzer: BZ+ and BZ- pad used for 5V Buzzer
- Mounting: 30.5x30.5mm, hole size 4mm
- Dimensions: 41 (L) x 38 (W) x 8.1 (H) mm
- OSD: BetaFlight OSD with AT7456E chip
- BlackBox: 500 MB integrated data flash
- BetaFlight Camera Control Panel: Yes
- ESC Telemetry: UART UART4 RX
- Power consumption: 3S - 6S Lipo
- Goal: SPEEDYBEEF7V3
- SmartPort: Supported
- Baro: BMP280 (I2C)
- MCU: STM32F722
- Start button: Yes
- RSSI Input: Yes
- IMU: BMI270
- USB: Type-C
- Weight: 9G
SPEEDYBEE 50A BLHELI_32 128K ESC
- Current Sensor: Supported (Scale=490 Offset=0)
- Mounting: 30.5x0.5mm, hole size 4mm
- Dimensions: 45.6 (length) x 40 (width) x 8.8 mm (height)
- Firmware: SpeedyBee BL32 50A
- Weight: 19.2g with heatsink
- Direct current: 50Ax4
- Power consumption: 3S - 6S LiPo
- Burst current: 55A (5S)
- Output power: VBAT
Package Included
- 1x SpeedyBee F7 V3 flight controller
- 1x 60mm 4-Pin SH1.0 to SH1.0 Analog VTX Cable - Yellow & Blue
- 1x SH1.0 6-pin GPS Module Cable without connector - 100mm
- 1x FPV Camera Cable 4 Pin SH1.0 to 3+ 2 Pin JST1.25 - 30mm
- 1x FPV Camera Cable 4 Pin SH1.0 to 3+ 2 Pin JST1.25 - 60mm
- 1x 4 Pin SH1.0 to 4 Pin JST1.25 FPV Camera Cable - 60mm
- 1x SH1.0 6-pin GPS Module Cable with Connector
- 1x SH1.0 4-pin radio receiver cable - 100mm
- 1x SH 1.0mm 8 pin -30mm cable
- 5x M3 8mm Silicone Eyelets
- 1x DJI 6-pin cable - 80mm
- 1x SpeedyBee 50A BLHeli_32 128K ESC
- 1x 35V 1500uF Low ESR Capacitor
- 1x SH 1.0mm 8 pin -30mm cable
- 5x M3 8.1mm Silicone Eyelets
- 5x M3 Silicone O-rings
- 1x XT60 power cable
MANUAL AND WIRING DIAGRAM:
EnglishSHIPPING
Italy
• Express Shipping (1-4 working days)
• Free for orders over €150.00
• €9.99 for orders under €150.00
Europe (European Union)
• International Express Shipping (2-6 business days)
• €29.99 for all orders
PAYMENT METHODS
On Drone24hours.com you can use the following payment methods:
- Paypal
- Visa
- Visa Electron
- CartaSi
- Postepay
- MasterCard
- American Express
- Paypal prepaid cards linked to the Visa or Mastercard circuit
- Cash on delivery
Return Policy
You can return products that you are not satisfied with within 14 days of receiving your order. To be eligible for a return, the product must be in the same condition in which you received it, unworn or unused, with tags and in the original packaging. You must also have your receipt or proof of purchase.
Damaged or incorrect goods
In case you receive wrong or damaged goods, please contact us immediately within 14 days of receiving your order. Please send an email with photos and videos of the product, a detailed description of the problem and what you have done to solve it. You may be asked to return the item. For confirmed defective goods, we will send a replacement free of charge.
Exceptions / Non-returnable items
Some items cannot be returned, such as perishable goods (food, flowers, plants), personalized or made-to-order products, and personal care products (cosmetics). We do not accept returns on hazardous materials, flammable liquids, or gases. We do not accept returns on sale items or gift cards.
Exchanges
If you wish to exchange an item, the fastest way is to return it and place a new order for the new item.
Under the 24-month Legal Guarantee, Drone24Hours is responsible to the consumer for any defects in conformity that cannot be detected at the time of purchase.
The lack of conformity exists when the product is not suitable for the use for which it is normally intended, does not conform to the description or does not possess the qualities promised by the seller, does not offer the qualities and performances usual for a good of the same type, is not suitable for the particular use desired by the consumer if brought to the attention of the seller at the time of purchase and accepted by the seller (art. 129 of the Consumer Code).
Any lack of conformity which becomes apparent within 24 months of the date of purchase of the goods must be reported within 2 months of the date of discovery of the defect.
Unless proven otherwise, it is presumed that any lack of conformity that becomes apparent within 6 months of delivery of the goods already existed on that date. In the event of a lack of conformity, the consumer has the right to have the conformity of the goods restored, free of charge, by repair or replacement (art. 130 of the Consumer Code).
The consumer may ask, at his choice, the seller to repair the goods or replace them, free of charge in both cases, unless the requested remedy is objectively impossible or excessively expensive compared to the other. Repairs or replacements must be carried out within a reasonable time from the request of the Consumer; the average time for returning the product to the Consumer is 20 days.
If Drone24hours is unable to return the repaired product within the maximum period of 60 days, the consumer may request one of the alternative remedies (replacement, termination of the contract, price reduction).
Drone24Hours will send the product for any repairs to the Technical Assistance Center authorized by the Manufacturer.
What happens if the Service Center does not find the lack of conformity?
If the lack of conformity is not found, Drone24Hours will communicate the estimate to the Customer, who can decide whether or not to carry out the repair at his own expense. In this case, any transport costs and diagnosis of the defect requested by the Assistance Center will be borne by the Customer.
