IFLIGHT After the popular 3-inch Cinematic BumbleB and the Green Honet CineWhoop series, we were looking to increase performance and reduce weight for an even better and longer flight experience for a wide variety of use.
The brand new 3.5 inch project is finally ready for all you content creators or those guys who like to wear a little protection every now and then. Prop protection is what we're talking about here...
ProTek is not necessarily just a Cinewhoop series but much more. Equipped with our brand new 2203.5 engines for more power and less heat. We have been able to increase the speed and thrust by 50% compared to its 3 inch predecessor which offers much more space for much more fun. Our GPS-measured top speed was over 120 km/h, and a max thrust of 750 g per motor (3 kg total) carried even heavier cams than one for Gopro, but also performed some loaded punch outs or light freestyle moves.
Much attention has been paid to the different assembly options. Our stock BNF will ship in the standard configuration but you can do a pusher mod (flip the build upside down) or a lite mod (remove the protective plastic for weight optimization).
Durable plastic protectors with copper standoffs, portable compact design, easily accessible UBS port without disassembly, LED battery status, lost model buzzer and a universal TPU for GoPro TPU for a full or bare size for GoPro. If you want to go lighter, get one of our 5V balanced plug for GoPro power cables to eliminate the internal battery.
Do you need a nude for GoPro case or mount? Check out our new naked iFlight TPU case for GoPro Hero8 to use with your ProTek35.
Characteristics:
- IMPROVED PROPS V2.0 (optimized material)
* No props or frames in sight!
*High performance True-AIO Beast Whoop F7 AIO 45A card to save weight and space
* T700 quality carbon (40% more tensile strength than common 3K carbon)
* Lightweight one-piece frame design (less flex, stiffer, more durable)
* Low resonance chassis construction (less gelatin, more cinematic footage)
*Nebula Nano Digital HD System
* Smooth butter 2203.5 3600KV (4S)
* Pre-tuned with smooth freestyle settings
PRE-TUNED AND PRE-SETUP:
Don't worry about tuning, we've already done it for you! Basic PID and filter tuning has been applied for a great flying experience!
To restore lost tunes or updates, please check our linked article on "Firmware/Factory Dumps"
Angle mode (auto-balance mode) is enabled by default to make sure your first flight doesn't end in a mess!
Please check our linked article on "How to turn off Angular mode, turn on Acr0 mode"
ProTek35 BNF Specifications:
* Beast Whoop F7 AIO 45A card
* Motor: XING 2203.5 3600KV (4S)
* Wheelbase: 151 mm
*Body size: 118*94.5mm
*Bottom plate thickness: 3.5mm
*Top plate thickness: 2mm
* Distance between top and bottom plates: 20mm (height of aluminum spacer)
* Propeller Size: 3.5 inches
*FC Model: 25.5*25.5mm/20*20mm
*FPV Cam Spacing: 20mm
* Weight: 348.3g (without battery)
ProTek35 HD Quad Components and Parts Included BNF
Pre-built and tested Quadcopter
1 x ProTek35 frame
1 x DJI FPV Camera
1 x DJI FPV Air Unit Module
2 x DJI FPV Aerial Unit SMA Antenna
1 x DJI Air Unit Module TPU Bracket
1 x TPU Antenna Holder for DJI Antenna
2 Nazgul 3535 Propellers (Set of 4 - Color may vary)
1 x iFlight Lipo Strap 15*150mm (color may vary)
1 x iFlight Lipo Strap 15*250mm (color may vary)
1 x For GoPro Black TPU Bottom Mount (For GoPro Protector Not Included)
FC // Beast F7 AIO
MCU: BGA-STM32F745
Gyro: MPU6000
UART: 5
Black box: 8 MB onboard Flash
BEC Output: 5V 2.5A
Barometer: BMP280
Connector: Micro-USB
OSD: AT7456E
FC Firmware：IFLIGHT_F745_AIO
Mounting pattern: 25.5*25.5mm φ3mm
Size: 32.5*32.5mm
Weight: 8.5g
ESC // 45A 2-6S
* Current sensor: yes
* Input: 2-6S LIPO
* Current scale: 200
* Constant: 45A / Burst: 50A
* BLHeli: BLHeli-S
* RPM filter ready: Yes (JazzMaverick or JESC firmware)
* Telemetry: no
* ESC Firmware: BlheliS GH-30
*Mounting pattern: 25.5*25.5mm/Φ3mm
*Size: 32.5*32.5mm
Important
The DJI remote controller is recommended for beginners since you don't need to set up another receiver, but it is also optional in this BNF drone because it is NOT needed to use the FPV system. If you don't choose to use the DJI remote controller, you can choose a receiver option for your transmitter and then connect to your radio as usual.
PLEASE NOTE: EACH MODEL WILL BE INSPECTED BY OUR STAFF BEFORE BEING SHIPPED.
SHIPPING
Italy
• Express Shipping (1-4 working days)
• Free for orders over €150.00
• €9.99 for orders under €150.00
Europe (European Union)
• International Express Shipping (2-6 business days)
• €29.99 for all orders
PAYMENT METHODS
On Drone24hours.com you can use the following payment methods:
- Paypal
- Visa
- Visa Electron
- CartaSi
- Postepay
- MasterCard
- American Express
- Paypal prepaid cards linked to the Visa or Mastercard circuit
- Cash on delivery
Return Policy
You can return products that you are not satisfied with within 14 days of receiving your order. To be eligible for a return, the product must be in the same condition in which you received it, unworn or unused, with tags and in the original packaging. You must also have your receipt or proof of purchase.
Damaged or incorrect goods
In case you receive wrong or damaged goods, please contact us immediately within 14 days of receiving your order. Please send an email with photos and videos of the product, a detailed description of the problem and what you have done to solve it. You may be asked to return the item. For confirmed defective goods, we will send a replacement free of charge.
Exceptions / Non-returnable items
Some items cannot be returned, such as perishable goods (food, flowers, plants), personalized or made-to-order products, and personal care products (cosmetics). We do not accept returns on hazardous materials, flammable liquids, or gases. We do not accept returns on sale items or gift cards.
Exchanges
If you wish to exchange an item, the fastest way is to return it and place a new order for the new item.
Under the 24-month Legal Guarantee, Drone24Hours is responsible to the consumer for any defects in conformity that cannot be detected at the time of purchase.
The lack of conformity exists when the product is not suitable for the use for which it is normally intended, does not conform to the description or does not possess the qualities promised by the seller, does not offer the qualities and performances usual for a good of the same type, is not suitable for the particular use desired by the consumer if brought to the attention of the seller at the time of purchase and accepted by the seller (art. 129 of the Consumer Code).
Any lack of conformity which becomes apparent within 24 months of the date of purchase of the goods must be reported within 2 months of the date of discovery of the defect.
Unless proven otherwise, it is presumed that any lack of conformity that becomes apparent within 6 months of delivery of the goods already existed on that date. In the event of a lack of conformity, the consumer has the right to have the conformity of the goods restored, free of charge, by repair or replacement (art. 130 of the Consumer Code).
The consumer may ask, at his choice, the seller to repair the goods or replace them, free of charge in both cases, unless the requested remedy is objectively impossible or excessively expensive compared to the other. Repairs or replacements must be carried out within a reasonable time from the request of the Consumer; the average time for returning the product to the Consumer is 20 days.
If Drone24hours is unable to return the repaired product within the maximum period of 60 days, the consumer may request one of the alternative remedies (replacement, termination of the contract, price reduction).
Drone24Hours will send the product for any repairs to the Technical Assistance Center authorized by the Manufacturer.
What happens if the Service Center does not find the lack of conformity?
If the lack of conformity is not found, Drone24Hours will communicate the estimate to the Customer, who can decide whether or not to carry out the repair at his own expense. In this case, any transport costs and diagnosis of the defect requested by the Assistance Center will be borne by the Customer.
| Color |
Yellow, Grey |
|---|---|
| Version |
4S, 6S |
| Receiver |
ELRS 2.4G, PNP, FRSKY R-XSR, TBS Nano Rx SE, DJI |
