Due to the discontinuation of the Runcam Nano3 camera, the Mobula7 1s now comes with the Caddx ant camera from May 2024. The Mobula7 1s with Caddx ant camera has been called version V2. Please note.
Characteristics
X12 5-IN-1 AIO Flight Controller Built-in 2.4G ELRS V2.0 & Openvtx
VTX Power up to 400mW
ELRS V2.0 support
NEW RS0802 KV20000 engines
Caddxfpv ANT 1/3 CMOS 1200TVL Camera
Smooth and powerful
Compatible for 1S Lipo/LIHV
Recommend 1S 450mah/550mah/650mah battery ( not included )
Specifications
- Brand: Happymodel
- Item Name: Mobula7 1S 75mm Micro FPV drone whoop
- Wheelbase: 75mm
- Size: 99mm*99mm*40mm
- Weight: 24g
- Battery connector: PH2.0
components
The engine | Mode: RS0802 KV20000 Configuration: 9N12P Stator diameter: 8 mm Stator length: 2mm Shaft diameter: Φ1.5mm Motor size(diameter*length): Φ10.5mm*13.5mm Weight (g): 2.0 g No. of cells (Lipo): 1S only |
Propellers | Weight: 0.24 g Material: PC Pitch: 1 inch Bit diameter: 40 mm Central thickness: 5 mm Center hole diameter: 1.5mm |
Flight Controller | X12 ELRS Flight Controller V1.0 Built-in 2.4G ELRS Receiver Target: CRAZYBEEF4SX1280 Frsky X12 Flight Controller V1.0 Built-in Frsky 2.4G SPI Receiver Target: CRAZYBEEF4FR X12 Flight Controller PNP V1.0 with External TBS CRSF Nano Receiver Target: CRAZYBEEF4DX X12 Flight Controller PNP V1.0 without built-in receiver Target: CRAZYBEEF4DX MCU: STM32F411CEU6 (100MHZ, 512K FLASH) Sensor: MPU6000 or ICM20689 or BMI270 (SPI connection) Mounting hole size: 25.5mm*25.5mm Power supply: 1S battery input (DC 2.9V-4.35V) 12A built-in (each) Blheli_S 4in1 ESC Integrated Betaflight OSD (SPI control) OpenVTX 5.8G integrated 0mW~400mW Built-in 2.4G ExpressLRS, Frsky D8/D16 Integrated voltage detection Integrated current sensor |
Integrated 4in1 ESC | Power supply: 1S LiPo/LiPo HV Current: 12A continuous peak 15A (3 seconds) Supports programmable BLHeliSuite Factory firmware: Z_H_30_REV16_7.HEX Default protocol: DSHOT300 Supports Bluejay firmware When using Blujay firmware with 48khz, you need to set the boot power to 1100/1200 |
Integrated 2.4GHz ExpressLRS SPI receiver | Packet speed option: 50Hz/150Hz/250Hz/500Hz ExpressLRS firmware version: V2.0 RF Frequency: 2.4GHz Antenna: SMD antenna Telemetry Output Power: <12 dBm Receiver Protocol: SPI ExpressLRS Compatible with TX ExpressLRS V2.0 module Unable to flash separate ExpressLRS firmware |
Integrated 5.8g OPENVTX | Firmware version: OPENVTX Smart Audio v2.1 PIT mode support RCE mode support Channels: 48 channels Transmit power: 0/RCE/25mw/100mw/400mw Power supply: DC 5V Current (5v):650ma~1000ma |
Caddxfpv ANT Camera | Image Sensor: 1/3″ CMOS sensor Horizontal resolution: 1200 TVL TV System: NTSC or PAL PICTURE: 16:9 or 4:3 Sync: Electronic shutter internal : PAL: 1/50~100.000; NTSC: 1/60~100,000 S/N ratio: >52 dB (AGC OFF) Video Output: CVBS Lens: 1.8mm Min. Illumination: 0.001 Lux@F1.2 Automatic Gain Control: YES WDR: Global WDR DNR: DNR 3D Size: 14*14mm (with bracket up to 19*19mm) Wide power input: DC 3.7-18V Weight: 2 g (NW) |
Recommended Parts
- Gaoneng GNB 660mAh 3.8V 1S 90C/180C HV 4.35V PH2.0 plug with wire
-
Gaoneng GNB 660mAh 3.8V 1S 90C/180C HV 4.35V PH2.0 plug
Package Included
- 1x Mobula7 1S 75mm whoop drone frame (Mobula7 v4 frame)
- 1x RS0802 KV20000 brushless motor
- 1x Gemfan 1610-2 double-bladed propellers (4cw+4ccw)
- 1x Caddxfpv ANT 1/3 CMOS 1200TVL Camera
- 1x Openvtx integrated 5.8G 0mw~400mw VTX
- 1x 1S Parallel Charging Board
- 1x Propeller Removal Tool
- 1x Additional camera canopy
PLEASE NOTE: TO ENSURE THE HIGHEST QUALITY, EACH MODEL WILL BE INSPECTED BY OUR STAFF BEFORE BEING SHIPPED.