NOTICE: The new version ELRS V2 comes with the ExpressLRS UART receiver built into the CrazyF411 ELRS AIO flight controller.
NOTICE: Loctite 222 screw glue is used during the installation process of the motor screw, please be careful when disassembling the motor.
CRUX35 is a 3.5 inch ultra-lightweight Freestyle FPV racing drone, the weight of the whole drone is only 87g for the analog version. The Crux35 serial drone uses Happymodel EX1404 high-efficiency motor and HQPROP 3.5 inch three-blade propeller to ensure the maximum thrust-to-weight ratio under the most efficient premise, which can bring you a smooth Freestyle flight experience. The analog version is equipped with CADDXFPV Ant camera, as for the receiver version, it is UART ExpressLRS which is the most popular RC connection system now and can work very well with Crux35.
Characteristics
Integrated ExpressLRS UART receiver
EX1404 High Efficiency Power System
Can be equipped with Naked Gopro or SMO4K
Support 3-4S battery Recommended 4S 750mah battery, max support 4S 1100mah
Specifications
- Brand: Happymodel
- Product Name: Crux35
- Wheelbase: 150 mm
- Weight: Crux35 87 grams
- Dimensions: 130mm x 130mm x 45mm (without propellers)
- Receiver: UART ExpressLRS 2.4GHz
- Camera and VTX: Analog version Ant+OVX306 VTX
- Flight time: 9min~15min 4s 750mah battery
- Battery Connector: XT30
Component Specifications
The engine | Mode: EX1404 KV Options: KV3500 Configuration: 9N12P Diameter stator: 14mm Stator length: 4mm Shaft diameter: Φ1.5mm Motor size (diameter*length): Φ15 mm*15 mm Weight (g): 9 g |
|
Propellers | Propeller diameter: 3.5 inches Step: 2 Blades: 3 Material: Polycarbonate Weight: 1.5 g Hub diameter: 10mm Hub thickness: 4.7mm Shaft: 1.9/1.5/1.9mm Adapter rings: NO |
|
Flight Controller
(ELRS UART Version) CrazybeeF411ELRS |
|
|
Integrated 4in1 ESC | MCU updated to EFM8BB21 Power supply: 2-4S LiPo/LiPo HVCurrent: 12A continuous peak 15A (3 seconds) Programmable BLHeliSuite support Factory firmware: FH-40 Default protocol: DSHOT300 |
|
Integrated 2.4GHz ExpressLRS UART receiver (ELRS UART version) | Packet Rate Option: 25Hz/50Hz/150Hz/250Hz/500Hz RF Frequency: 2.4GHz Antenna Plug: IPEX Telemetry Output Power: <12 dBm Receiver protocol: CRSF Default firmware version: ExpressLRS V3.0.1 |
|
Caddx ANT 1200tvl Camera
(Analog version) |
Image Sensor: 1/3″ CMOS sensor Horizontal resolution: 1200 TVL TV System: NTSC or PAL PICTURE: 16:9 or 4:3 Sync: Electronic shutter internal : PAL: 1/50~100.000; NTSC: 1/60~100,000 S/N ratio: >52 dB (AGC OFF) Video Output: CVBS Lens: 1.8mm Min. Illumination: 0.001 Lux@F1.2 Automatic Gain Control: YES BLC: YES WDR: Global WDR DNR: DNR 3D Size: 14*14mm (with bracket up to 19*19mm) Wide power input: DC 3.7-18V Working temperature: -20℃~+60℃ Weight: 2g (NW) |
|
OVX306 5.8Ghz VTX (analog version) |
Model: OVX306 Frequency: 5.8G 40CH Transmit power: 0/RCE/25mw/100mw/300mw Power supply: DC 5V Current (5v): <650ma (300mw) Weight: 1.5 grams without antenna |
Recommended Parts
Package Included
- Crux35 Frame
- CrazyF411 ELRS FC with UART ELRS
- Caddx Ant Analog FPV Camera
- Happymodel OVX303 Analog VTX 5.8G
- Happymodel EX1404 KV3500 brushless motor
- HQProp T3.5X2X3Grey (4cw+4cw)
- Screwdriver
- Velcro Buckle for Battery