Note: The chip of GOKU GM10 V3 GPS is M1005. Only BF4.3x version firmware can use the Ublox protocol. Firmware BF4.2x and earlier can only use NMEA protocol But there is no difference in performance between the two protocols
BETAFLIGHT:
Use firmware above 4.3.0
INAV:
Use the latest configurator 6.0.0, the latest firmware above 5.0.0
Characteristics
- Brand: FLYWOO
- Model: GM10 MINI V3 GPS
- Size: 18mm*18mm*4.8mm
- Weight: 4.7g
- Connector: 1.00mm gap between 4-pin patch seat
GPS module, three modules
1.0mm gap between 4 pin patch seat
Technical specifications
- Electrical characteristics
- Chipset: M10050 (10th generation chip)
- Reception format: GPS, GLONASS, Galileo, BeiDou, QZSS and SBAS
- Default protocol: GPS,Galileo,BeiDou
- Frequency: GPS L1,GLONASS L1,BeiDou B1,SBAS L1,Galileo E1
- Channels: 72 Search Tracking channel sensitivity : -162dBm
- Reacquisition: -160dBm
Data and update speed
- Support Rate: 4800bps to 921600bps, default 115200bps
- Data level: TTL or RS-232
- default TTL level
- Data protocol: BF4.3.X (UBLOX)/BF4.2.X (NMEA)
- Output Frequency: 1Hz-10Hz,10Hz default
Operational limits
- Altitude: 50,000 m
- Maximum speed: 500 m/s
- Maximum acceleration: less than 4 g
Energy consumption
- VCC: DC Voltage: 5V
- Operating temperature: -40°C ~ +85°C
- Storage temperature: -40°C ~ +105°C
Indicator
PPS LED: yellow. PPS LED not bright when GPS is not fixed, flashing when fixed
The module pins: GND TX RX 5V
Package Included
- 1x GM10 MINI V3 GPS
- 1x 100mm cable
- 1x copper foil