GEPRC TAKER F405 BLS 50A STACK is a plug-and-play stack system specially designed for DJI air unit. It uses STM32F405 chip, ICM42688-P gyroscope, integrated 16M black box and GEP-BLS50A-4IN1 ESC to have a more delicate hand feeling experience.
The GEPRC TAKER F405 BLS 50A STACK can be connected directly to the DJI Air unit, saving you the trouble of soldering. Upgrade the USB Type-C connector, which greatly improves the life of the socket and reduces the risk of poor contact. Dual independent 9V 2.5A + 5V 3A BEC, more stable power supply for external devices.
Characteristics
- It uses the mainstream STM32F405 chip
- Equipped with the latest 42688-P gyroscope
- 16 million black box storage
- Integrated LC filter
- Upgrade USB Type-C interface
- Connected directly to DJI air unit
- With the GEP-BLS50A-4IN1 ESC, the flying sensation is silky
- Simple and reasonable installation method, the shock absorber can make the gyro work very stably
- 9V 2.5A + 5V 3A independent dual BEC
Technical specifications
Flight Controller GEP-F405-HD v2
- MCU: STM32F405
- IMU: ICM42688-P(SPI)
- Connection to Air Unit: Direct connection to DJI Air Unit
- Black box: 16 million on board
- USB Connector: Type C
- OSD: BetaFlight OSD with AT7456E chip
- BEC: 5V, 9V dual BEC
- Firmware target: GEPRCF405
- Size: 36.8×36.8mm, hole 30.5×30.5mm, φ4mm hole becomes φ3mm after using silicone shock absorbing circle.
- Input voltage: LiPo 3-6S
- UART: 6
- Power Filter: Built-in LC filter
- Weight: 7.7g
GEP-BLS50A-4IN1 ESC
- Input voltage: Lipo 3-6S
- Galvanometer: support
- Continuous current: 50A
- Burst current: 55A (5s)
- Support protocol: Oneshot125/Oneshot42/Mulishot/Dshot 150/300/600 mode
- Size: 42.9×39.7mm, hole 30.5×30.5mm, φ4mm hole becomes φ3mm after using the silicone shock absorbing circle.
- Weight: 13.7g
- Objective: G_H_30
Package Included
- 1 x Flight Controller
- 1 x ESC
- 1 x Capacitor
- 1 x DJI Air Unit Adapter Cable
- 1 x Flight Controller Adapter Cable
- 1 x XT60 Power Cable
- 4 x M3*30 screws
- 4 x M3*24 screws
- 8 x Nylon Nuts
- 8 x Silicone Grommets
- 2 x sh1.0 4pin silicone cable
- 1 x Camera Connection Cable