The HD VTX has introduced a new upgrade, and the brand new VTX of the DJI O3 Air Unit has pushed the digital system to a new level. The GEPRC team is also upgrading and optimizing the overall performance based on MARK5. At the same time, it will be equipped with the DJI O3 Air Unit to design the new version MARK5 O3.
The newly upgraded aluminum alloy camera side plate, 7075-T6 aluminum alloy is strong and durable. It can be fully adapted to DJI's new O3 air unit camera, with a 155° field of view (FOV), and the recording specifications can support up to 4K 60FPS. We also specially designed TPU mounting parts for the O3 VTX module and equipped with an air inlet cooling port, which promotes adequate heat dissipation in the air unit. The MARK5 O3 uses the latest SPAN F722-BT-HD V2 stack from GEPRC, with ICM 42688P gyro for smooth flight, performance and redundant ports, and supports Bluetooth wireless connection for tuning. The SPAN BLHeli_32 50A ESC with GEPRC 2107.5 motor and uses the new Gemfan 5136 propellers, which has strong power. MARK5 O3 comes with two different camera mounts, which can be mounted with a full range of GoPro action cameras,
This time, MARK5 O3 will broaden your horizons, fly beyond what you have ever seen, and offer more possibilities for FPV creation.
Characteristics
1. Aluminum alloy side plate with upgraded lens, durable and more visual impact
2. Built-in Bluetooth, support mobile phone wireless connection for parameter adjustment
3. Specially developed for freestyle with a squashed X-arm design.
4. The HD version uses DJI's new O3 VTX, clear image, stable signal, low latency, long distance, and supports recording up to 4K/60fps
5. SPAN G50A BLHeli_32 ESC 4in1 50A with the latest GEPRC 2107.5 motor, featuring high power, fast response speed, precise throttle control and smooth flight experience
6. Unique frame shock absorption design, less vibration, safe and stable electronic system operating environment
7. With independent capacitor and buzzer cabin, the operating environment of the whole drone is extremely stable, no vibration, no jitter
8. Two types of 3D printing camera mounts are designed, which can be mounted with a full range of GoPro cameras, as well as Naked GoPro 8, Insta 360 GO2 and Caddx Peanut cameras. The shooting effect is stable and clear
9. Add Coral Orange and Emerald Green colors to the O3 version to add more colors to your flight
10. MARK5 O3 is optimized for freestyle, with a smoother flight experience
Specifications
-
Model: MARK5 HD O3 Quadcopter
-
Brand: GEPRC
-
Frame: GEP-MK5 O3
-
Wheelbase: 225 mm
-
Top plate: 2.5mm
-
Bottom plate: 2.5mm
-
Arm plate: 5mm
-
FC system: SPAN F722-BT-HD V2
-
MCU: STM32F722
-
Gyroscope: 42688-P (SPI)
-
OSD: BetaFlight OSD with AT7456E chip
-
ESC: SPAN G50A BLHeli_32 4IN1 50A 4-6S ESC
-
VTX: DJI O3 Air Unit
-
Camera: DJI O3
-
Propeller: Gemfan 5136
-
Antenna: DJI O3 Antenna
-
Motor: SPEEDX2 2107.5-1960KV (6S version) / SPEEDX2 2107.5-2450KV (4S version)
-
Weight: 404.9g (MARK5 HD O3 including 3D printed parts)
-
Receiver: PNP, Frsky R-XSR, TBS Nano RX, ELRS 2.4G
-
Recommended battery: LiPo 6S 1050mAh-1550mAh(6S version)
- Battery Connector: XT60
Package Included
1 x MARK5 HD O3 Quadcopter
4 Gemfan 5136 propellers (pair)
1 x Battery Strap M15x250mm
2 x M20x220mm battery straps
2 Silicone Battery Pads
1 x 3D Printed Parts
1 x Action Cam Mount
1 set of screws
1 set of screwdrivers
1 fixed antenna tube