HD VTX has ushered in a new upgrade, and the brand new VTX of DJI O3 air unit has pushed the digital system to a new level. GEPRC team is also upgrading and optimizing the overall performance based on MARK5. At the same time, it will be equipped with DJI O3 air unit to design the new version MARK5 O3, the versions are MK5D and MK5X respectively.
The newly upgraded aluminum alloy camera side plate, 7075-T6 aluminum alloy is strong and durable. It can be fully adapted to DJI's new O3 air unit camera, with a 155° field of view (FOV), and the recording specifications can support up to 4K 60FPS. We also designed TPU fixing parts specifically for the O3 VTX module and equipped with a cooling port for air intake, which is conducive to adequate heat dissipation in the air unit. The MARK5 O3 uses the latest GEPRC TAKER F722 BT BL32 50A STACK, with ICM 42688P gyro for smooth flight, performance and redundant ports, and supports Bluetooth wireless connection for tuning. The GEP-BL32 50A 96K 4IN1 ESC with GEPRC 2107.5 motor and uses the new Gemfan 5136 propellers, which have strong power. DC structure has a wide and unobstructed viewing angle during flight, suitable for O3 internal video recording and direct output. MARK5 O3 comes with two different camera mounts, which can be mounted with a full range of GP action cameras, as well as Naked GP 8/10 camera, Insta 360 GO2 and Caddx Peanut, etc. to record beautiful moments during your flight.
This time, MARK5 O3 will broaden your horizons, fly beyond what you have ever seen, and offer more possibilities for FPV creation.
Change log
April 28, 2024: GEPRC MARK5 DC FC changed from GEP-F722-HD-BT to GEP-F722-BT-HD V3 FC,
ESC changed from SPAN G50A BLHeli_32 4IN1 50A 4-6S ESC to GEP-BL32 50A 96K 4IN1 ESC,
Stack changed from SPAN F722-BT-HD V2 STACK to TAKER F722 BT BL32 50A STACK.
Characteristics
1. Aluminum alloy side plate with upgraded lens, durable and more visual impact
2. Built-in Bluetooth, support mobile phone wireless connection for parameter adjustment
3. Specially developed for freestyle with crushed X-arm design.
4. The HD version uses DJI's new O3 VTX, clear image, stable signal, low latency, long distance, and supports recording up to 4K/60 fps
5.GEP-BL32 50A 96K 4IN1 ESC with the latest GEPRC 2107.5 motor, featuring high power, fast response speed, precise throttle control and smooth flight experience
6. Unique frame shock absorption design, less vibration, safe and stable electronic system operating environment
7. With independent capacitor and buzzer cabin, the operating environment of the whole drone is extremely stable, no vibration, no jitter
8. Two types of 3D printing camera mounts are designed, which can be mounted with a full range of GP cameras, as well as Naked GP 8, Insta 360 GO2 and Caddx Peanut cameras. The shooting effect is stable and clear
9. Add Coral Orange and Emerald Green colors to the O3 version to add more colors to your flight
10. The DC structure is suitable for O3 internal recording when no propeller is visible during flight, while the X structure is more suitable for freestyle when the propeller is slightly visible during O3 internal recording.
Specifications
-
Model: MARK5 DC HD O3 Quadcopter
-
Brand: GEPRC
-
Chassis: GEP-MK5D O3/GEP-MK5X O3
-
Wheelbase: 225 mm
-
Top plate: 2.5mm
-
Bottom plate: 2.5mm
-
Arm plate: 5mm
-
FC System: GEP-F722-BT-HD V3 FC
-
MCU: STM32F722
-
Gyroscope: 42688-P(SPI)
-
OSD: BetaFlight OSD with AT7456E chip
-
ESC: GEP-BL32 50A 96K 4IN1 ESC
-
VTX: DJI O3 Air Unit
-
Camera: DJI O3
-
Propeller: Gemfan 5136
-
Antenna: DJI O3 Antenna
-
Motor: SPEEDX2 2107.5-1960KV (6S Version) / SPEEDX2 2107.5-2450KV(4S Version)
-
Weight: MK5D: 426.0 g, MK5X: 404.9 g (MARK5 HD O3 including 3D printed parts)
-
Receiver: PNP, TBS Nano RX, ELRS 2.4G
-
Recommended battery: LiPo 4S 1300mAh-1800mAh (4S version) / LiPo 6S 1050mAh-1550mAh (6S version)
- Battery Connector: XT60
Recommended Parts
- Tattu Funfly 1300mAh 14.8V 100C 4S1P XT60
- Tattu R-Line Version 3.0 1300mAh 4S1P 120C XT60
- Tattu R-Line Version 3.0 1800mAh 4S1P 120C XT60
- Tattu R-Line Version 4.0 1050mAh 22.2V 130C 6S1PXT60
- Tattu R-Line Version 3.0 1550mAh 22.2V 120C 6S1P XT60
- Tattu Funfly 1550mAh 22.2V 100C 6S1P XT60
Package Included
- 1 x MARK5 DC HD O3 Quadcopter
- 4 Gemfan 5136 propellers (pair)
- 1 x M15x250mm battery strap
- 2 x M20x220mm battery straps
- 2 Silicone Battery Pads
- 1 3D printed part
- 1 x Action Cam Mount Holder
- 1 set of screws
- 1 set of screwdrivers
- 1 fixed antenna tube