It was the power system, using F722-45A AIO with the new SPEEDX2 2105.5 engine, which has higher power and faster response speed.
This makes flying with your GoPro camera easier and allows you to perform some difficult flying actions. You can even freestyle with the GEPRC Naked Hero 8 camera. Therefore, CineLog35 Performance can perfectly meet all the requirements of aerial photography creators to achieve superior shooting quality.
the analog version has been significantly updated. Uses incredible high-power 1.6W VTX RAD, stable signal transmission, strong anti-interference ability, longer signal transmission distance.
Integrated propeller guard design with high flight safety allows indoor and outdoor flying.
This is an FPV quad that combines cinematic shooting, freestyle and cruising to meet your indoor and outdoor flying needs in various scenes.
Characteristics
1. Built-in 3.5 inch propeller guard, hollowed out design for weight reduction and noise reduction, quiet and safe flight, brand new appearance design
2. Equipped with high-performance FC GEPRC F722-45A AIO and integrated BLHeli_S 45A 6S ESC.
3. Caddx VISTA HD and Walksnail AVATAR HD digital image transmission system makes the FPV image stable and clear, and restores true colors and details.
4. SPEEDX2 2105.5 motor with DT90-3 propeller, stable power and smooth flying experience.
5. Inverted motor design, higher flight efficiency, longer flight duration, flexible flight attitude.
6. Comes with two 3D printed parts, which can be installed with GoPro or Naked 8,10 Camera, Insta 360 GO2 and Caddx Peanut cameras.
7. Shock-absorbing gimbal design, shooting more stable and clearer, no more jelly.
8. The analog version uses 1.6W VTX high-power RAD, stable signal transmission, strong anti-interference ability and longer signal transmission distance.
9. GEPRC team's Splendid Tuning and overall flying feel are delicate and flexible.
Cruise flight time
6S 1550MAH battery: 5 minutes and 30 seconds (with GoPro10 mounted)
6S 1550MAH battery: 7 minutes 30 seconds (none)
Specifications
- Model: CineLog35 Performance Analog
- Brand: GEPRC
- Chassis: GEP-CL35 performance
- Wheelbase: 142 mm
- Top plate: 2.5mm
- Bottom plate: 2.0mm
- Arm plate: 3.5mm
- FC System: GEP-F722-45A AIO
- MCU: STM32F722
- IMU: 6 axes
- OSD: BetaFlight OSD with AT7456E chip
- ESC: BLheli_S 45A
- VTX: RAD 5.8G VTX 1.6W
- Camera: Caddx Ratel2
- Propeller: HQ DT90-3
- Antenna: GEPRC Momoda 5.8g MMCX RHCP 195mm Long Version Antenna
- Motor: SPEEDX2 2105.5-2650KV
- Weight: 257.9 g (CineLog35 Performance Analog 6S PNP)
- Receiver: PNP, Frsky R-XSR, TBS Nano RX, ELRS2.4G
- Battery connector: XT60
Recommended parts
- Tattu R-Line Version 3.0 1550mAh 22.2V 120C 6S1P XT60
- Tattu R-Line Version 4.0 1300mAh 22.2V 130C 6S1P XT60
- Tattu Funfly 1550mAh 22.2V 100C 6S1P XT60
- Tattu FunFly 1300mAh 6S1P 100C XT60
Package Included
- 1x high performance analog CineLog35
- 2x HQ DT90-3 propellers (pair)
- 1x M15x200mm battery strap
- 2x Silicone Drum Pads
- 2x landing pads
- 1x 3D printing replacement parts
- 1x set of screws
- 1x screwdriver set
- 1x CADDX OSD menu board
- 1x fixed antenna tube
PLEASE NOTE: TO ENSURE THE MAXIMUM QUALITY, EACH MODEL WILL BE INSPECTED BY OUR STAFF BEFORE BEING SHIPPED.