GEPRC CineLog20 HD O3
For the demanding indoor shooting needs, GEPRC recently released the GEPRC CineLog20 HD 03 2-inch Cinewhoop. Available in Link Wasp, O3 AIR Unit, Walksnail and four mainstream analog video transmission systems on the market.
The CineLog20 continues the CineLog series with a lightweight push-pull design, and the redesigned camera gimbal vibration reduction solution provides an excellent mounting platform for the O3 AIR unit to shoot, which can achieve excellent anti-shake effect. The O3 AIR Unit version can shoot 4K 120fps video without mounting any camera. It is lighter and has a longer battery life.
Adopts GEPRC SPEEDX2 1303.5 5500KV motor and GEP-F411-35A AIO. Equipped with Emax 4-blade propellers, a reasonable and efficient power system makes CineLog20 very quiet and has a long battery life, making flying and shooting safer. Using one-piece injection molding camera mount, you can quickly mount GEPRC naked GoPro 8/9/10/11, Action2, insta360 Go2, Peanut and other small and lightweight action cameras.
Characteristics
-
Designed to mount a shock-absorbing gimbal under the independent FPV camera to reduce the image jelly of FPV goggles, with good anti-vibration effect.
-
Provide traditional versions of Link Wasp, O3 AIR Unit and Walksnail HD, Bind-N-Fly video transmission to avoid the trouble of construction and tuning.
-
2 inch pusher design, small size and lightweight, more suitable for flight shooting in complex and narrow environments.
-
The SPEEDX2 1303.5 5500KV motor with Emax four-blade propellers makes flying unhurried.
-
Continuing the vibration damping structure of the CineLog series, which can effectively eliminate the image jelly caused by the body during flight with a Naked GoPro mounted.
-
The GEPRC team's wonderful tuning and the overall flying feeling is delicate and flexible.
Specifications
- Model: CineLog20 HD O3
- Frame: GEP-CL20
- Wheelbase: 100 mm
- Gimbal plate: 2.0mm
- Top plate: 2.5mm
- Bottom plate: 1.5mm
- FC System: GEP-F411-35A AIO
- MCU: STM32F411CEU6
- Gyroscope: ICM 42688-P
- OSD: Betaflight OSD with AT7456E chip
- ESC: 8bit 35A
- VTX: O3 AIR Unit
- Camera: O3 camera
- Antenna: 5.8G and 2.4G
- Engine: GR1303.5 5500KV
- Propeller: EMAX Avan Micro 2×2.4×4
- CineLog20 HD O3 TBS Weight NanoRX: 140 g
- Receiver: PNP (Built-in DJI receiver), ELRS2.4G, TBS Nano RX/RXSR
- Battery Connector: XT30
- Flight time: 4-6 minutes
Recommended Parts
- Tattu 650mAh 4S1P 75C 14.8V XT30
- Tattu R-Line 650mAh 14.8V 4S1P 95C XT30
- Tattu R-Line 550mAh 14.8V 4S1P 95C XT30
- Tattu 450 MAh 4S1P 75C 14.8V XT30
Package Included
1 CineLog20 HD O3
2 x 2 inch propellers (pairs)
1 GoPro Naked Base
2 x M15*150mm battery straps
2 Silicone Battery Pads
2 EVA landing pads
1 set of screws
1 x L-Shaped Screwdriver (1.5mm)
1 fixed antenna tube
1 GoPro Naked 4S Power Cable (with Balanced End Cap)
2 EVA anti-vibration protection rings
1 x TBS antenna holder (vertical type)
1 x TBS antenna holder (horizontal type)
1 x TBS Antenna Printed Parts
The screw package includes:
3 x M2 x 12mm pan head screws
2 x M2 x 5mm round head screws
1 x M2*8mm round head screw with bearing
3 x M2*7mm Round Head Screws
2 x M2*8mm Round Head Screws
2 M2 iron nuts
1 self-clinching nut
PLEASE NOTE: TO ENSURE THE HIGHEST QUALITY, EACH MODEL WILL BE INSPECTED BY OUR STAFF BEFORE BEING SHIPPED.