The GEP-CL35 V2 version was released after careful development by the GEPRC team.
GEP-CL35 V2 is developed and upgraded based on CL35. It can be mounted with O3 VTX . The camera adopts bottom-mounted shock-absorbing gimbal to solve the resonance problem of camera IMU and achieve good anti-vibration effect. The carbon main plate and injection propeller guards increased 7075 aluminum column for structural reinforcement.
Battery installation method using a strap with 7075 aluminum parts fixed. The XT60E1-M power plug and carbon plate are integrated and integrated for convenient application. The prop guard adds a memory card and USB port to the O3 Air unit for easy data reading.
GEPRC is committed to the best flight experience !
Specifications
- Model: GEP-CL35 V2
- Engine to engine: 142mm
- Top plate: 2mm
- Bottom plate: 1.5mm
- Arm plate: 3.5mm
- FC Mounting Hole: 25.5mm x 25.5mm
- VTX Mounting Hole: 20mm x 20mm/25mm x 25mm
- Motor mounting hole: 12mm x 12mm
- Camera installation space: 20mm
- Propeller guard inner diameter: 95mm
- Suitable propeller size: 3.5 inch propeller
- Weight: 133.7 g
Characteristics
- The Pro p protection for the O3 Air unit adds memory card and USB port for easy data reading.
- Innovative shock-absorbing structure of the camera to solve the problem of lens IMU resonance and achieve the optimal anti-shake effect.
- Battery installation method using a belt with fixed 7075 aluminum parts, solid and stable.
- Power cable with XT60E1-M plug and integrated carbon plate design, easy to use.
- The injection-molded propeller guard is sturdy and impact-resistant, and the connection between the frame and the carbon plate is reinforced with aluminum columns.
Package Included
Carbon plate
- 1x 3.0mm Carbon Main Plate
- 1x 2.0mm top plate
- 1x 1.5mm XB bottom plate
Screw kit
- 2x Aluminum Fixed Parts for Battery Strap
- 2 X 7075 M2*11.5*4 Mesh Aluminum Column
- 4 X 7075 M2*25*3.3 Mesh Aluminum Column
- 4x Custom M3*15 crescent head screws
- 6x M2*18 pan head screws
- 2x M2*16 round head screws
- 4x M2*4 bearing round head screws
- 4x M2*5.5 round head screws
- 30x M2*7 Round Head Screws
- 14x M2*12 Round Head Screws
- 16x M2*8 round head screws
- 6x M1.6*8 round head screws
- 4x M2*6 round head screws
- 6x M2.5*6 round head screws
- 1 X M5x28 Chamfered Hex Socket Head Cap Screws
- 4x M3 Push-In Rivet Nuts
- 4x M2 self-tightening nuts
- 18x M2 Iron Nuts
- 1x M5 flange nut
- 12x Push Rivet Nut_Brass Color M2*1.9-OD4.9
3D Printed Parts
- 1x 2 Hole Camera Mount
- 1x Camera Mount X 4 Holes
- 1x Receiver Holder X
- 1x T-shaped antenna mount
- 1x VTX antenna mount
- 1x Condenser Holder
- 1x Power Plug Printed Parts
- 1x GP Camera Base Mount
Injection Molded Parts
- 1x Injection molded propeller guard
- 4x Anti-vibration rubber for FC M2*6
- 6x Camera Anti-vibration Rubber
- 4x M3*10.5*10.25 Camera Gimbal Shock Absorbing Rubber Ring
Other accessories
- 1x XT60E1-M power plug with cable
- 4x M7 x 15mm motor hubs
- 3x 80mm VTX 5.8G Extension Cables
- 7x Heat Shrink Tubing
- 1x Bare GP Camera Base Mount (1 X Base Mount, 2 X M2*12 Round Head, 2 X M2 Push Rivet Nut)
- 4x BEC bearings
- 2x Anti-slip Battery Pads for Cinelog 35 v2
- 2x 100mm Receiver Antenna Stick
- 1x M20*250 battery strap
- 1x M20*220 battery strap
- 1x 1.5mm L-shaped screwdriver
- 1x 2.0mm L-shaped screwdriver
- 1x 3.0mm L-shaped screwdriver
- 1x M5 key
- 1x Keychain
- 1x Quick Start Guide X
- 2x GEPRC stickers
- 1x service card
- 1x packing box
- 1x User Manual
- 1x promotional card