The CineLog35 Performance version is optimized and updated based on the standard version. The CineLog35 is designed with lighter weight and greater durability. The concept of the Performance version is to maximize Racing performance and achieve perfection with existing frame dimensions.
We have upgraded the power system, using F722-45A AIO with the new SPEEDX2 2105.5 motor, which has higher power and faster response speed.
It makes flying with your GoPro camera easier and allows you to perform some difficult flying actions. You can even freestyle with the GEPRC Naked Hero 8 camera. Therefore, CineLog35 Performance can perfectly meet all the requirements of aerial photography creators to achieve superior shooting quality.
Absolutely, we've upgraded more than horsepower. In the FPV imaging system, we use Walksanil camera, which has excellent imaging effects, crystal clear FPV images and excellent color and detail reproduction.
Of course, the analogue version has also been significantly updated. Uses amazing high power 1.6W RAD VTX, stable signal transmission, strong anti-interference ability, farther signal transmission distance.
In short, we've made many updates and optimizations for CineLog35 Performance, which makes it easier to mount your GoPro camera for creative shooting work. Integrated propeller guard design with high flight safety allows indoor and outdoor flying.
This is an FPV quad that combines film shooting, freestyle, racing and cruising to meet your indoor and outdoor flying needs in various scenes.
We have strived for lighter weight, better flying experience and more functionality for all our products!
Specifications
- Control (protocol): without radio
- Battery connector: XT60
- Motor: brushless, GEPRC SPEEDX2 2105.5 (2650kv)
GEPRC GEP-F722-45A FC AIO:
- Operating Voltage: 7-22V (Li-Po 2-6S)
- Processor: STM32F722
- IMU sensor (accelerometer/gyroscope): 42688
- Barometer: no
- OSD: BetaFlight (AT7456E)
- BEC: 5V/2.5A
- Black box: 16 MB
- Target: GEPRC_F722_AIO
- Maximum constant current: 45A
- Maximum short-term current: 55A
- USB: MicroUSB
Avatar Walksnail Video Transmitter:
- Operating frequency: 5.725-5.850 GHz
- Number of channels: 8
- Video resolution: 1080p/720p
- Power:
- FCC: <30dBm
- CE: <14dBm
- SRRC: <20dBm
- MICROPHONE: <25 dB
- Signal delay: 22ms
- Built-in internal memory: 8GB
- Interfaces: JST1.0 (4 pin) for USB / JST1.0 (6 pin) for controller
- Antenna connector: IPEX/U.FL
Microcamera for Walksnail avatar:
- Matrix: 1/2.7" Starlight CMOS
- Lens: 2.1mm
- Range: 1080p (60fps) / 720p, (120fps) / 720p, (60fps)
- Viewing angle: 170°
- Aperture: F2.0
- Minimum illumination: 0.001Lux
- Aspect ratio: 16:9 / 4:3 (switchable)
- TV system: NTSC/PAL (switchable)
- Signal delay: 22 ms
- Battery: no
- Propeller: HQProp DT90 (3 blades)
- GEPRC GEP-CL35 chassis:
- Diagonal distance between the drive axles: 142 mm
- Beam thickness: 3.5mm
- Bottom plate thickness: 2mm
- Top plate thickness: 2.5mm
- Frame dimensions: 203x203x42 mm
- Weight: 258g (without battery)
Recommended parts
Package Included
- 1x GEPRC CineLog35 Performance HD Walksnail 6S
- 1x HQProp DT90 propellers (2CW+2CCW)
- 1x GEPRC strap for battery attachment (15x220 mm)
- 1x TPU Mount for GoPro Naked (Lite) Action Camera
- 1x Fasteners and accessories