CineLog35 v2 version integrated with O3 VTX. CineLog35 V2 version of the carbon main plate and injection protection frame has increased the 7075 aluminum column for structural strengthening.
The battery mounting method uses a clamp with fixed 7075 aluminum parts. The XT60E1-M power plug is integrated with the carbon plate for convenient application. The protective frame for O3 Air Unit adds a memory card and USB port for easy data reading.
Equipped with F722-45A AIO and new SPEEDX2 2105.5 engine, more power, with aggressive fuel system and quicker response.
This is a 3.5 inch HD FPV cinematic drone that integrates cinema, freestyle, leisure and safety to meet the user's needs for flying and shooting various scenes indoors and outdoors. The satisfied voice of the user is the motivation for us to move forward.
Change log
May 8, 2023: CineLog35 V2 engine changed from SPEEDX2 2105.5-2150KV(6S) to SPEEDX2 2105.5-2650KV(6S).CLI dump for CineLog35 V2: https://geprc.com/downloads/cinelog35-v2/
Characteristics
- New appearance design, carbon plate reinforcement, hollow design, injection protection frame, noise reduction design, flight safety, quiet.
- Adopts GEP F722-45A AIO V2 high-performance flight controller.
- Propeller Guard adds memory card and USB ports to the O3 Air unit for easy data reading
- For the design of independent O3 camera under shock absorption gimbal, to solve the camera IMU resonance problems, to achieve the optimal anti-vibration effect.
- SPEEDX2 2105.5 motor with HQ DT90 propeller, stable power and smooth flying feeling.
- Power cable with XT60E1-M plug and integrated carbon plate design, convenient application.
- Battery installation method using a tie with fixed 7075 aluminum parts, solid and stable.
- Carefully tuned 3.5 inch HD cinematic FPV with flexible and delicate flight feeling.
Specifications
- Model: Cinelog35 V2 HD O3
- Frame: GEP-CL35 V2
- Wheelbase: 142 mm
- Gimbal plate: 2.0mm
- Top plate: 3.5mm
- Bottom plate: 1.5mm
- FC System: GEP-F722-45A AIO V2
- MCU: STM32F722RET6
- Gyroscope: ICM 42688-P
- OSD: Betaflight OSD with AT7456E chip
- ESC: 8bit 45A
- VTX: O3 Air Unit
- Camera: O3
- Antenna: 5.8G and 2.4G
- Motor: SPEEDX2 2105.5-2650KV (6S)
- Propeller: HQProp D-T90MM
- GPS: GEP-M8U
- CineLog35 V2 HD O3 TBS NanoRX weight: 285.8 g
- Receiver: PNP, GEPRC ELRS 2.4G, TBS Nano RX
- Battery Connector: XT60
- Flight time: 5′00″ -8′ 30″