Characteristics:
-
Latest STM32G473 processor
- 180 Mhz + math accelerator
- IIM-42652 SPI gyroscope
-
Supply voltage 6-27V (2S-6S Lipo)
-
2x dedicated on-board BECs (2A each)
- 5V BEC for RX
- 5V/16V BEC for VTX (switchable and real Pit*)
- Improved I/O protection
-
All microcontroller IOs, e.g. in connectors or solder pads, they are protected against voltage or current spikes
-
-
2x 8 pin connector for solderless ESC connection
- Connector 1: ESC 1-4 signal, telemetry, VCC, GND
- Connector 2: ESC signal 5-8 (depending on UAV type 1-4), telemetry, VCC, GND
-
1 x 8 pin connector for solderless VTX, cam connection and OSD or digital systems
-
real Pit* VCC, GND, Video In, Video Out, BEC 5V/16V, VCS/TX3, RX3
-
-
2 6-pin serial connectors
- RX1, TX1, 3.3V, VCC, 5V, GND
- RX3, VCS/TX3, RGB LED, VCC, 5V, GND
-
1x 4-pin receiver connector
-
Signal, TLM, 5V, GND
-
-
5 UART serials
- UART 1 free
- UART 2 used for Receiver
- Free UART 3
- UART 4 used for built-in OSD, can be freed
- UART 5 used for ESC/TLM/Onewire
-
4 ESC (Signal/GND) soldering pads in each corner
-
Buzzer
-
4 tiny RGB LEDs (color selectable)
-
ESC protocols supported
- PWM, Oneshot125, Oneshot42, Dshot150/300/600/1200/2400, FETtec Onewire
- FETtec Alpha FC Firmware (Flashable KISS FC Firmware)
- Updated integrated OSD
- Graphic OSD (STM32)
- Full KISS tuning
-
- Filter (PID, rates, settings)
- LED Control (RGB LED, Racewire)
- VTX
- Real-time data graphs (voltage, engine rpm, current, engine temperature, gyroscopic values, connection quality)
- Support KISS GPS + live map
- Custom graphic pilot logo
- Stick overlap
- Custom layout
- can be deactivated for the use of digital systems
-
Connector Type: JST-SH-1mm
* Real Pit-Mode: One pin remote switchable power supply
Dimensions:
-
Maximum external dimensions: 37.2 x 37.2 mm, without external tips 30 x 30 mm
-
Mounting hole layout:
- 20 x 20 mm with M2 mounting hole (expandable to M3)
- 30 x 30mm with M3 mounting hole
- The 30 x 30 mm mounting hole tips are removable to reduce the overall size of the FC
-
Total height: 7.9mm
-
Weight: 5.37g
Firmware:
- FETtec Alpha FC Firmware (Flashable KISS FC Firmware)
- FETtec OSD Firmware
Package Included
- 1x FETtec FC G4 v1.7
- 1x 8-pin cable (open on one side)
- 1x 6-pin cable (open on one side)
- 1x 4 pin calbe (open on one side)
SHIPPING
Italy
• Express Shipping (1-4 working days)
• Free for orders over €150.00
• €9.99 for orders under €150.00
Europe (European Union)
• International Express Shipping (2-6 business days)
• €29.99 for all orders
PAYMENT METHODS
On Drone24hours.com you can use the following payment methods:
- Paypal
- Visa
- Visa Electron
- CartaSi
- Postepay
- MasterCard
- American Express
- Paypal prepaid cards linked to the Visa or Mastercard circuit
- Cash on delivery
Return Policy
You can return products that you are not satisfied with within 14 days of receiving your order. To be eligible for a return, the product must be in the same condition in which you received it, unworn or unused, with tags and in the original packaging. You must also have your receipt or proof of purchase.
Damaged or incorrect goods
In case you receive wrong or damaged goods, please contact us immediately within 14 days of receiving your order. Please send an email with photos and videos of the product, a detailed description of the problem and what you have done to solve it. You may be asked to return the item. For confirmed defective goods, we will send a replacement free of charge.
Exceptions / Non-returnable items
Some items cannot be returned, such as perishable goods (food, flowers, plants), personalized or made-to-order products, and personal care products (cosmetics). We do not accept returns on hazardous materials, flammable liquids, or gases. We do not accept returns on sale items or gift cards.
Exchanges
If you wish to exchange an item, the fastest way is to return it and place a new order for the new item.
Under the 24-month Legal Guarantee, Drone24Hours is responsible to the consumer for any defects in conformity that cannot be detected at the time of purchase.
The lack of conformity exists when the product is not suitable for the use for which it is normally intended, does not conform to the description or does not possess the qualities promised by the seller, does not offer the qualities and performances usual for a good of the same type, is not suitable for the particular use desired by the consumer if brought to the attention of the seller at the time of purchase and accepted by the seller (art. 129 of the Consumer Code).
Any lack of conformity which becomes apparent within 24 months of the date of purchase of the goods must be reported within 2 months of the date of discovery of the defect.
Unless proven otherwise, it is presumed that any lack of conformity that becomes apparent within 6 months of delivery of the goods already existed on that date. In the event of a lack of conformity, the consumer has the right to have the conformity of the goods restored, free of charge, by repair or replacement (art. 130 of the Consumer Code).
The consumer may ask, at his choice, the seller to repair the goods or replace them, free of charge in both cases, unless the requested remedy is objectively impossible or excessively expensive compared to the other. Repairs or replacements must be carried out within a reasonable time from the request of the Consumer; the average time for returning the product to the Consumer is 20 days.
If Drone24hours is unable to return the repaired product within the maximum period of 60 days, the consumer may request one of the alternative remedies (replacement, termination of the contract, price reduction).
Drone24Hours will send the product for any repairs to the Technical Assistance Center authorized by the Manufacturer.
What happens if the Service Center does not find the lack of conformity?
If the lack of conformity is not found, Drone24Hours will communicate the estimate to the Customer, who can decide whether or not to carry out the repair at his own expense. In this case, any transport costs and diagnosis of the defect requested by the Assistance Center will be borne by the Customer.
