Finally, the iFlight 3D Printed High Quality TPU Naked GoPro8 Case is here! The GoPro Hero 8 Naked TPU Case is durable, flexible and easy to install. This case features...
This holder fits perfectly with a BN220 GPS and a JHE42B buzzer. Makes it easier to press the buzzer off button after a flight. Be careful not to detach the...
TPU GPS and immortal T support for Cinelog35 and Cinelog35 Performance. GPS Recommended - HGLRC GPS dimensions: 20x18 mm version Cinelog35_GPS_ImmortalT_TBS - TBS GPS 20x22mm Package Included 1x GepRC Cinelog...
Simple and lightweight GoPro Hero TPU mount for Frame Lumenier QAV-S 5" (JB Edition) Angle is adjustable Weight 8.7 g without screw. Package Included 1x GoPro Hero TPU holder Recommended...
The injection molded parts are sturdy and explosion-proof, and the angle is adjustable. Compatible with: MX-C Taycan / Taycan 25 / Roma Package Included 1x Universal fixed base 1x fixed...
This HD Cube Camera Mount for Session/RunCam 5 is specifically designed for SpeedyBee FS225 V2. Speedy Bee's FS225 V2 frame is a rugged and versatile frame for any builder. With...
Universal engine cover protectors for 22 M3*8 series engines Specific: Item Name: Universal Engine Cover Protector Suitable for 22 series engines Product weight (4 pieces): 12 g Total weight: 22g...
Package Included 1x Action camera holder(Go Pro) for GEPRC-MARK5 NOTE: "We would like to inform our kind customers that TPU prints may require a variable production time, depending on the...
TPU support for Geprc cinelog35 v2 action cameras Characteristics Simple support for Geprc cinelog35 v2 drone that allows you to install any action cum and determine the inclination you want,...
This is a dji o3 camera TPU mount made for Nazgul xl5. Package Included 1x DJI O3 IfLight Nazgul XL5 Camera Support NOTE: "We would like to inform our kind...
We have designed this TPU mount for dji air unit O3 camera for Cinelog 25. Version designed so that the propellers are not visible even at low angles. Package Included...
Mounting the Cinelog 35 SMA antenna at 45 degrees. No support. tpu. 3 perimeter. The mounting point is above the top plate because the antenna adapter connector isn't flexible and...
adapter for flight controller (FC) from 30x30 to 20x20 In TPU This is a 30.5mm to 20mm FC adapter. The 20mm mount uses 2mm screws and can be threaded as...
DarwinFPV CineApe25 Walksnail 1S adapter - durable version Characteristics Simple adapter for Darvin FPV CineApe 25 drone that allows you to install the Walksnail 1S kit. VTX is rotated 45...
DarwinFPV CineApe 19x19mm Camera Mount with Action Cam Mount Characteristics DarwinFPV CineApe 19x19mm camera support with support for action cameras printed in TPU material with the possibility of varying the...
GoPro TBS Source One V5 support GoPro support for TBS Source One V5. The SOURCE ONE is a wide stance X-configuration airframe popular for freestyle or free-range aerobatic flying. It...
TBS Tango 2 V2 gimbal protection Protection for the gimbals of your TBS tango 2 V2 radio control designed in a single piece version with an added bar for connecting...
TBS Mambo gimbal protection United gimbal protectors designed for the TBS Mambo controller. It fits perfectly on the ends of the stick making it remain secure and protected even in...
iFlight Nazgul Evoque F5 crash bars (left and right) 3D printing of the iFlight Nazgul Evoque F5 Bumpers in TPU to protect the engines from impacts and damage during your...
Emax Tinyhawk II Freestyle 1S Battery Tray Simple 1S Battery Box with Antenna Holder for Emax TinyHawak II freestyle racing drone. The print is made of TPU.Filling: 100% Package Included...
Happymodel Mobula 8 lens protection support
Characteristics
3D printed lens caps for Mobula8
Materials: TPU
Weight: 0.3 grams
STL file for download:
download here
GoPro RUNCAM 5 TPU support Runcam 5 support with ND filter position and attachment for GoPro type fixings Available in various colors: Red, Blue, Green, Black, Cyan, Blue, Yellow. Package...
TBS Source One V5 SMA attachment TBS Source One V5 SMA Mount with Mounting Holes for Rush Cherry FPV Antenna. For the design, the support for the TBS source one...
TBS Source One V5 front bumper Designed to protect the front of your model from accidental impacts for the TBS source one V5. The SOURCE ONE is a wide stance...
TBS Source One V5 arm protector TPU printed protection to protect the arm and motor from accidental impacts for TBS Source One V5. The SOURCE ONE is a wide stance...
Taranis Q X7, Q X7S universal universal joint protectors The Taranis Q X7 requires a smaller diameter gimbal than its popular partner, the X9D. Unlike other gimbal protectors, these are...
Radiomaster tx16s gimbal protection The Radiomaster TX16S i Gimbal Protectors have been designed to fit snugly with the small bump on the bottom of the gimbals that gets in the...
Radiomaster Zorro Gimbal Protections Separate gimbal protectors designed for the Radiomaster Zorro controller. Inspired by Elliott Turner's protections. It fits perfectly on the ends of the original stick (8.2 mm)...
Radiomaster Pocket gimbal protection United gimbal protectors designed for the Radiomaster Pocket controller. It fits perfectly on the ends of the original stick making it remain secure and protected even...
Radiomaster TX12 gimbal protection Separate gimbal protectors designed for the Radiomaster TX12 controller. It fits perfectly on the ends of the stick making it remain secure and protected even in...
Iflight Commando 8 gimbal protection United gimbal protectors designed for the iflight commando 8 controller. Fits perfectly on the ends of the stick making it stay secure and protected even...
FrSky Taranis X9 lite gimbal protection Separate gimbal protectors designed for FrSky Taranis X9 lite controller. It fits perfectly on the ends of the stick making it remain secure and...
Ethix PropTool Allen Key Cap This double cap connected by a strap is printed in TPU and has been designed to protect your pockets, backpack and even the very sharp...
Legs for Mobula 6 These little legs were designed to avoid hitting the ground with the bottom of the drone during your landings. They were made to be very light...
ImpulseRC APEX 5" front bumper This bumper leaves the bottom screws free to tighten and attaches to the frame using the first bottom hole in the frame. It also slides...
ImpulseRC APEX 5" Motor Arm Protector Thickness in increased version compared to the original standard Apex skate. The 4mm thickness allows the mounting of longer motor screws. Specifications Compatible Frame...
Front bumper for iFlight Nazgul Evoque F5D and F5X Designed to protect the front of your model from accidental impacts for the iFlight Nazgul Evoque F5D and F5X. The chassis...
Rear bumper and ELRS antenna holder for iFlight Nazgul F5 Designed to protect the front of your model from accidental impacts for the iFlight Nazgul Evoque F5D and F5X. The...
Gopro iFlight Nazgul Evoque V2 mount 3D TPU printing designed to support your GoPro, compatible with iFlight Nazgul Evoque V2 F5D and F5X model. Specifications Model Name: iFlight Nazgul Evoque...
Cinelog 20 baseplate the plate was designed to protect the drone when landing on a rough surface. It's a sacrificial part, so it will eventually need to be replaced The...
We often restock popular items or they may be returned by the other customers. If you would like to be
notified when this happens just enter your details below.
We respect your privacy and don't share your email with anybody.
×
Alert me if this item is restocked
Thank you, we have now received and recorded your request to be notified should
be restocked.