Drones are expensive and water-sensitive devices, so it’s crucial to act quickly if your drone ends up in water. Here’s a step-by-step guide to help you save your drone in the event of an accident.
Steps to follow:
-
Remove the drone from the water immediately
Turn off the power immediately and remove the battery to avoid short circuit. -
Rinse with distilled water
Rinse the drone and components with distilled water (or tap water if you don't have it) to remove salts and chemicals found in seawater or groundwater, which can cause damage and short circuits. -
Dry with a hair dryer
Use a hair dryer for 2 minutes on low heat, being careful not to damage the parts. -
Put the drone in a bag with raw rice
Place the drone in a sealed plastic bag with uncooked rice and let it sit for 3 days. The rice will help absorb any remaining moisture. -
Control the drone
After 3 days, check if the drone is completely dry. Turn it on and check if all the components are working. Turn off immediately if there is a short circuit, smoke or flame. -
Assess the damage
If your drone is not functioning properly, identify which components may be damaged.
Conclusion
By following these steps, you will increase your chances of recovering your drone. With a little patience and care, you may be able to save it and get it back in the air.
